Enjoying DTV broadcasts
09
43
En
Clear All Data
This function resets all DTV-related settings and preset channels to
factory default.
1 Press HOME MENU.
2 Select “Setup” (
/
then ENTER).
3 Select “DTV Setup” (
/
then ENTER).
4 Select “Installation” (
/
then ENTER).
• The password entry screen appears. Enter your 4-digit
password using buttons
0
to
9
.
5 Select “Clear All Data” (
/
then ENTER).
• A confirmation screen appears.
• Selecting “Yes” moves to the next screen while selecting
“No” cancels “Clear All Data” option.
6 Select “Yes” and start initialising all the DTV settings (
/
then ENTER).
• Once the initialisation starts, you cannot stop it halfway.
• To perform the initialisation properly, do not turn the power
off while the initialisation is in progress.
Note
• You can select “DTV Setup” only while viewing DTV channels.
• Do not choose this option unless you understand the
functioning of the tuner. No viewing channels will remain
afterwards. Setup procedures and scanning will have to be
performed again after taking this step.
Time Zone Setup
Use this function to display the correct time when the banner
(i-PLATE) appears on the screen. Designate the correct city or
region you live in, otherwise incorrect time displays.
1 Press HOME MENU.
2 Select “Setup” (
/
then ENTER).
3 Select “DTV Setup” (
/
then ENTER).
4 Select “Setup” (
/
then ENTER).
5 Select “Time Zone” (
/
then ENTER).
6 Select the region you live in from the list below (
/
).
NSW/ACT (New South Wales/Australian Capital Territory)
VIC (Victoria)
QLD (Queensland)
SA (South Australia)
WA (Western Australia)
TAS (Tasmania)
NT (Northern Territory)
7 Press HOME MENU to exit the menu.
Note
• You can select “DTV Setup” only while viewing DTV channels.
Quick Scan
Auto Scan
Manual Scan
Clear All Data
All user setting would be deleted.
Would you like to continue?
Yes
No
Time Zone
Audio Setup
Software
Time Zone
NSW/ACT
