13
EN
English
Installation and Connections
Installation and Connections
Connection to AV components
Connection to AV component equipped with
component video jacks
Make component video connections for AV components
equipped with component video jacks.
When connecting to ANALOG RGB IN (INPUT1)
ANALOG RGB IN
D-Sub
AUDIO
INPUT1
INPUT1
R
L
On-screen setup is necessary after connection.
Please see pages 21 to 23.
When connecting to COMPONENT VIDEO (INPUT5)
Y
C
B
/P
B
C
R
/P
R
INPUT5
COMPONENT
VIDEO
Connect the Y signal to the Y jack, the C
B
/P
B
signal to the
C
B
/P
B
jack, and the C
R
/P
R
signal to the C
R
/P
R
jack.
Note
This unit is designed to support component video signals with
standard, stable signal levels and sync signals. As a result, some
image disruption may be generated during use of various special
trick play functions on video components.
Connection of G ON SYNC analog RGB source
Make G ON SYNC connections for a component with
output that has the synchronization signal layered on top
of the green signal.
When connecting to ANALOG RGB IN (INPUT1)
ANALOG RGB IN
D-Sub
AUDIO
INPUT1
INPUT1
R
L
On-screen setup is necessary after connection.
Please see pages 21 to 23.
When connecting to COMPONENT VIDEO (INPUT5)
Y
C
B
/P
B
C
R
/P
R
INPUT5
COMPONENT
VIDEO
Connect the G ON SYNC signal to the Y jack, the B signal
to the C
B
/P
B
jack, and the R signal to the C
R
/P
R
jack.
On-screen setup is necessary after connection.
Please see pages 21 to 23.
