22
EN
English
System Settings
System Settings
Notes
÷
The [PC AUTO] setting supports automatic signal selection only
when using RGB separate SYNC inputs.
÷
When G ON SYNC or Composite SYNC signals are input,
selecting [PC AUTO] will cause the screen resolution to be set
to [XGA] only.
÷
When using G ON SYNC or Composite SYNC with WXGA
inputs, set [SIGNAL FORMAT] manually to [WXGA].
6
Press the SET button.
The setting is stored in memory and the screen
returns to that shown in step 4.
7
When a component other than a computer is
connected, use the
5
/
∞
buttons to select [COLOR
DECODING] then press the SET button (INPUT1 or
INPUT5).
STANDARD
INPUT1
PICTURE
SCREEN
SETUP
OPTION
PURECINEMA
CLAMP POSITION
SIGNAL FORMAT
COLOR DECODING
HDMI INPUT
COMPONENT
480p
AUTO
OFF
:
:
:
:
8
Use the
2
/
3
buttons to select the input signal
format.
SET
SET
EXIT
MENU
COMPONENT
:
C O L O R D E C O D I N G
Each time you press the
2
/
3
buttons, the setting
changes as follows:
The table below shows what settings are appropriate
and available for the type of connections made.
Set [SIGNAL FORMAT] and [COLOR DECODING] as follows.
Please take care when making settings. Incorrect settings
can adversely affect the plasma display.
9
Press the SET button.
This completes [COLOR DECODING] setting, and
returns you to the display shown in Step 7.
10
After completing settings, press the MENU button
to return to the normal display.
[CLAMP POSITION] setup
(INPUT1, 5)
Depending on the signal, analog RGB signals may result
in the screen image appearing with a whitish or greenish
cast. In such cases, set [CLAMP POSITION] to [LOCKED].
Normally, leave this setting at [AUTO].
MENU
5
/
∞
SET
2
/
3
Remote control unit
1
Press the MENU button to display the menu screen.
STANDARD
INPUT1
PICTURE
SCREEN
SETUP
OPTION
CONTRAST
BRIGHTNESS
COLOR
TINT
SHARPNESS
MPEG NR
DNR
CTI
ON
MID
ON
COLOR TEMP.
MID
PICTURE RESET
ENTER
SET
EXIT
MENU
:
0
:
0
:
0
:
:
:
:
:
0
:
0
2
Use the
2
/
3
buttons to select [SETUP].
STANDARD
INPUT1
PICTURE
SCREEN
SETUP
OPTION
PURECINEMA
CLAMP POSITION
SIGNAL FORMAT
COLOR DECODING
HDMI INPUT
RGB
480p
AUTO
OFF
:
:
:
:
3
Use the
5
/
∞
buttons to select [CLAMP POSITION]
then press the SET button.
STANDARD
INPUT1
PICTURE
SCREEN
SETUP
OPTION
PURECINEMA
CLAMP POSITION
SIGNAL FORMAT
COLOR DECODING
HDMI INPUT
RGB
480p
AUTO
OFF
:
:
:
:
Component video output
of a DVD player, etc.
Component video output
from digital tuner, etc.
RGB video output of a
video deck etc., with RGB
output
RGB video output of a PC
Connected
component
COLOR
DECODING
SIGNAL
FORMAT
SETUP
480p
720p
480p
VGA, WVGA,
720-PC,
XGA, WXGA
COMPONENT
COMPONENT
RGB
Not supported
3
RGB
2
3
COMPONENT
2
