01
Enjoying DTV broadcasts
8
En
Using Software Update
This function downloads and updates the system’s software
as specified.
Using Auto Update
When set to “On”, Auto Update allows you to upgrade to the
latest software version and add new channels when they
become available.
1
Press
HOME MENU
.
2
Select “Setup” ( /
then
ENTER
).
3
Select “DTV Setup” ( /
then
ENTER
).
4
Select “Software Update” ( /
then
ENTER
).
5
Select “Auto Update” ( / ).
6
Select “On” ( / ).
• We recommend that you normally select “On”.
• For Auto Update to start, there must be more than 1 hour
left to the start of the next preset recording/watching.
• 60 seconds before the scheduled update, a message
prompt appears asking if you want to carry out Auto Update
or not. Auto Update automatically starts if “OK” is selected
or no selection is made after 50 seconds.
• To quit an update in progress, press
HOME MENU
.
Setting Update Time
You can set the time your Plasma Display System performs
Auto Update each day. To use this function, set “Auto Update”
to “On” first.
1
Repeat steps 1 to 4 provided for
Using Auto Update
.
2
Select “Set Update Time” ( /
then
ENTER
).
3
Set a time for Auto Update ( / , / or
0
–
9
).
Starting Manual Update
This allows you to manually execute Software Update. If less
than 1 hour is left to the next scheduled Auto Update or
programmed recording/watching, Manual Update cannot be
executed.
1
Repeat steps 1 to 4 provided for
Using Auto Update
.
2
Select “Start Manual Update” ( /
then
ENTER
).
• For Manual Update to start, there must be more than 1
hour left to the start of the next preset recording/watching.
• For Manual Update to start, there must be more than 1
hour left to the start of Auto Update.
Software Update
Set Update Time
Start Manual Update
Auto Update
Technical Information
On
Set Update Time
Time
11
32
:
Setting Audio, Subtitle and Teletext
Language
You can select the available default audio, subtitle, and
teletext languages displayed on screen.
1
Repeat steps 1 to 4 provided for
Setting Digital Audio
.
2
Select “Language Setting” ( /
then
ENTER
).
3
Select “Primary Audio”, “Secondary Audio”, “Primary
Subtitle”, “Secondary Subtitle” or “Teletext” ( / ).
4
Select a language ( / ).
• The System automatically selects the language based on
the “Country” setting (page 28 in the operating instructions)
when the selected language for audio, subtitle, or teletext is
not available.
