51
En
Enjoying through External Equipment
12
English
Using HDMI Input
The INPUT 3 terminals include HDMI terminals to which digital
video and audio signals can be input. To use the HDMI
terminal, activate the terminal and specify the types of video
and audio signals to be received from the connected
equipment. For the types of these signals, see the operation
manual that came with the connected equipment.
Before starting the menu, press
INPUT 3
on the remote
control unit or press
INPUT
on the Plasma Display to select
INPUT 3.
For audio, the system supports the following:
• Linear PCM (STEREO 2ch)
• Sampling frequency: 32 kHz, 44.1 kHz, 48 kHz
NOTE
• PC signals are out of correspondence.
Connecting HDMI equipment
To activate the HDMI terminal:
1
Press
HOME MENU
.
2
Select “Option” ( / then
ENTER
).
3
Select “HDMI Input” ( / then
ENTER
).
4
Select “Setting” ( / then
ENTER
).
5
Select “Enable” ( / then
ENTER
).
6
Press
HOME MENU
to exit the menu.
To specify the type of digital video signals:
1
Repeat steps 1 to 3 provided for “
To activate the HDMI
terminal
”.
2
Select “Video” ( / then
ENTER
).
3
Select the type of digital video signals ( / then
ENTER
).
• If you select “Auto”, an attempt will be made to identify
the type of digital video signals when digital video
signals are received.
4
Press
HOME MENU
to exit the menu.
NOTE
• If you select a parameter other than “Auto”, make such a
setting that results in natural colour.
• If no image appears, specify another digital video signal type.
• For the digital video signal types to be specified, check the
operation manual that came with the connected equipment.
To specify the type of audio signals:
1
Repeat steps 1 to 3 provided for “
To activate the HDMI
terminal
”.
2
Select “Audio” ( / then
ENTER
).
3
Select the type of audio signals ( / then
ENTER
).
• If you select “Auto”, an attempt will be made to identify
the type of audio signals when audio signals are
received.
4
Press
HOME MENU
to exit the menu.
NOTE
• If no sound is output, specify another audio signal type.
• For the audio signal types to be specified, check the
operation manual that came with the connected equipment.
• Depending on the equipment to be connected, you also need
to connect analogue audio cables.
Input signal correlation table
1920
∗
1080i@50Hz
720
∗
576p@50Hz
1280
∗
720p@50Hz
720(1440)
∗
576i@50Hz
1920
∗
1080i@59.94/60Hz
720
∗
480p@59.94/60Hz
1280
∗
720p@59.94/60Hz
720(1440)
∗
480i@59.94/60Hz
1920
∗
1080p@24Hz
AC IN
INPUT 1
(rear view)
SCART cable
(commercially available.)
Connect the SCART cable only
when inputting analogue audio
signals.
HDMI equipment
HDMI cable
(commercially
available.)
Item
Description
Disable
(factory default)
Deactivates the HDMI terminal.
Enable
Activates the HDMI terminal.
Item
Description
Auto
(factory default)
Automatically identifies input digital video
signals.
Colour-1
Digital Component Video signals (4:2:2) locked
Colour-2
Digital Component Video signals (4:4:4) locked
Colour-3
Digital RGB signals locked
Item
Description
Auto
(factory default)
Automatically identifies input audio signals.
Digital
Accepts digital audio signals.
Analogue
Accepts analogue audio signals.
PDP-436SXE.book Page 51 Tuesday, November 8, 2005 10:04 AM
