PDP-5050SX
116
1
2
3
4
1
2
3
4
C
D
F
A
B
E
Command
Function
Validity of direct numeric input
Validity Lower limit
Upper limit
G
GS1
Obtaining information on the unit, such as the software version
GS2
Obtaining information on the status of the unit, such as the temperature
GS6
Obtaining the any version
GSD
Obtaining information on shutdown(SD1)
GSL
Adjusting side mask G
?
000
255
GYG
GY GAIN
?
000
255
I
INPS01
Input selection: Input 1
INPS02
Input selection: Input 2
INPS03
Input selection: Input 3
INPS04
Input selection: Input 4
INA
Selection of the tuner (Antenna A)
INB
Selection of the tuner (Antenna B)
M
MSKS00
Turning the Mask function off
MSKS01
White raster (change in luminance level)
MSKS02
White raster--zigzag, exact reverse--scan--gray--white raster
MSKS03
HL--zigzag, exact reverse--scan--gray--white raster
MSKS04
White raster--zigzag, exact reverse--scan--gray--white raster
MSKS10
H ramp (slant 1)
MSKS11
H ramp (slant 4)
MSKS12
H ramp (slant 1 shifting)
MSKS13
H ramp (slant 4 shifting)
MSKS14
V ramp (slant 1)
MSKS15
Slanting ramp
M1G
IC1 MAIN GAIN
?
064
191
M1O
IC1 MAIN OFFSET
?
064
191
MSKS20
Window (for WB adjustment, Hi = 870, Lo = 102)
MSKS21
Window (for WB adjustment, Hi = 1023, Lo = 102)
MSKS22
Window (for measuring the peak luminance during WB adjustment, Hi = 1023)
MSKS23
Window (for measuring the peak luminance, Hi = 1023, 4%)
MSKS24
Window (for measuring the peak luminance, Hi = 1023, 1.25%)
MSKS25
Window (vertical line with 1/7-width for measuring the stress)
MSKS26
Window (magenta, green, and stripe for check)
MSKS27
Window (green,magenta, and stripe for check)
MSKS28
Window (black & white [1 x 8], checker, for EMG check)
MSKS29
Window (for WB adjustment, magenta = 512, yellow = 512)
MSKS30
ColorBar
MSKS31
Slanted lines (for checking cable disconnection)
MSKS40
Wiper for erasing afterimage
MSKS51
Raster-white
MSKS52
Raster-red
MSKS53
Raster-green
MSKS54
Raster-blue
