Part names and functions
Top panel
1
2
3
4 5
6
7
8
9
a
c
b
f
g
h
i
j
k
l
m
n
e d
1
POWER switch
When turning the switch to the [
ON
] side, the power is turned on and
the strobe illuminator on the side lights.
Playback
(p. 12 )
2
START/STOP button
Pressing the button starts or stops rotation of the turntable.
Playback
(p. 12 )
3
Speed change button
Changes the speed according to the record to be played.
For a 33 1/3 rpm record, press the [
33
] button.
For a 45 rpm record, press the [
45
] button.
Playback
(p. 12 )
4
Stylus illuminator
Lights to illuminate the stylus tip.
Playback
(p. 12 )
5
Stylus illuminator switch
The stylus illuminator lights in white and ascends to the position at
which the stylus tip is illuminated.
Playback
(p. 12 )
6
Headshell
Used with a cartridge attached.
7
RESET button
8
RESET indicator
Pressing the [
RESET
] button turns on the [
RESET
] indicator. While
the [
RESET
] indicator is on, the turntable turns at the specified rota-
tion speed (33 1/3 rpm or 45 rpm) regardless of the position of the
TEMPO
slider.
Adjusting the pitch
(p. 13 )
9
TEMPO slider
You can slide back and forth to perform fine adjustment of the rota-
tion speed.
Adjusting the pitch
(p. 13 )
a
Tone arm
Adjustment
(p. 8 )
b
TEMPO RANGE button
Each time the button is pressed the tempo range switches, to ±8 %,
±16 %, or ±50 %.
Adjusting the pitch
(p. 13 )
c
TEMPO RANGE indicator
The set tempo range lights in blue.
d
Arm clamper
Clamps the tone arm.
e
Arm rest
Serves as the support base for the tone arm.
f
Lifter lever
The tone arm goes up when the lever is pulled up. The tone arm goes
down when the lever is pushed down.
g
Arm lifter
This device is used to move the tone arm up and down. It is operated
by the lifter lever.
h
ANTI SKATING dial
When a record is played, there is power to pull the stylus tip toward
the inner perimeter. By matching this dial to the stylus pressure
value, that power is eliminated.
Adjusting anti-skating
(p. 8 )
En
6
Summary of Contents for PLX-1000
Page 115: ......
