You can listen to the radio by using this navi-
gation system. This section describes opera-
tions for radio (AM).
%
Touch [AM] on the
“
AV Source
”
menu
to display the
“
AM
”
screen.
=
For details concerning operations, refer to
Reading the screen
5
4
1
2
3
1
Source icon
Shows which source has been selected.
2
Preset number indicator
Shows what preset item has been selected.
3
Frequency indicator
4
Signal level indicator
5
LOCAL
indicator
Shows when local seek tuning is on.
Using the touch panel keys
1
2
3
4
5
1
Recalls equalizer curves
=
For details, refer to
2
Displaying the
“
Function
”
menu
=
For details, refer to
3
Select a preset channel
c
or
d
can be used to switch presets.
4
Perform manual tuning
To perform manual tuning, touch [
c
] or [
d
]
briefly. The frequencies move up or down one
step at a time.
Perform seek tuning
To perform seek tuning, keep touching [
c
] or
[
d
] for about one second and release. The
tuner will scan the frequencies until a broad-
cast strong enough for good reception is
found.
p
You can cancel seek tuning by touching
either [
c
] or [
d
] briefly.
p
If you keep touching [
c
] or [
d
], you can
skip broadcasting frequencies. Seek
tuning will start as soon as you release
the keys.
p
Moving
MULTI-CONTROL
left or right
enables you to perform the equivalent
operations.
5
Displaying the map screen
Switching between the
detailed information display
and the preset list display
You can switch the left side of the basic screen
according to your preference.
%
Touch [Preset] (or [Detail]).
Each touch of [
Preset
] (or [
Detail
]) changes
the detailed information display or preset list
display.
Using the radio (
AM
)
En
106
Chapter
20
