Receiving a phone call
You can perform hands-free answering by
using the navigation system.
Answering an incoming call
The system informs you that it is receiving a
call by displaying a message and producing a
ring sound once.
If [
Auto Answer Preference
] is set to [
Off
],
answer the call manually. Answering is avail-
able if any screen is displayed, such as the
map screen or the setting screen.
p
You can set this navigation system to auto-
matically answer incoming calls.
=
For details, refer to
1
When a call comes in, the answering
operation menu appears on the bottom of
the screen.
p
You cannot carry out operations other than
answering calls.
2
To answer an incoming call, touch
.
When there is an incoming call, you can reject
the call by touching
.
p
You can adjust volume when you are talk-
ing. To adjust volume, touch [
Vol -
] and
[
Vol +
] displayed on the screen (like below)
when you are talking.
3
Touch
to end the call.
The call ends.
p
When there is an incoming call, pressing
MULTI-CONTROL
answers the call. During
the call, pressing
MULTI-CONTROL
gets
you off the phone.
p
If the voice on the other end of the call is
too quiet to hear, you can adjust the volume
of the received voice.
=
For more details about
“
Phone Vo-
lume
”
, refer to
p
You may hear a noise when you hang up
the phone.
Rejecting an incoming call
You can reject an incoming call.
=
For details, refer to
%
When a call comes in, touch
.
The call is rejected.
p
The rejected call is recorded in the missed
call history list.
=
For details, refer to
Making a phone call
You can make a phone call in many different
ways.
Using hands-free phoning
En
56
Chapter
08
