Introduction of advanced
built-in CD player operation
1
1
Function display
Shows the function status.
%
Press FUNCTION to display the function
names.
Press
FUNCTION
repeatedly to switch be-
tween the following functions:
Repeat
(repeat play)
Random
(random play)
Scan
(scan play)
Pause
(pause)
Comp./BMX
(compression and BMX)
FF/REV
(search method)
Tag Read
(tag
display)
#
To return to the playback display, press
BAND
.
Notes
!
When playing audio data (CD-DA), it is not ef-
fective even if you turn
Tag Read
(tag display)
on. (Refer to page 26.)
!
If you do not operate the function within about
30 seconds, the display is automatically re-
turned to the playback display.
Repeating play
Repeat play lets you hear the same track over
again.
1 Press FUNCTION to select Repeat.
Press
FUNCTION
until
Repeat
appears in the
display.
2 Press
a
to turn repeat play on.
Repeat :ON
appears in the display. The track
currently playing will play and then repeat.
3 Press
b
to turn repeat play off.
Repeat :OFF
appears in the display. The track
currently playing will continue to play and
then play the next track.
Note
If you perform track search or fast forward/re-
verse, repeat play is automatically cancelled.
Playing tracks in a random
order
Random play lets you play back tracks on the
CD in a random order.
1 Press FUNCTION to select Random.
Press
FUNCTION
until
Random
appears in
the display.
2 Press
a
to turn randomplay on.
Random:ON
appears in the display. Tracks
will play in a random order.
3 Press
b
to turn randomplay off.
Random:OFF
appears in the display. Tracks
will continue to play in order.
Scanning tracks of a CD
Scan play lets you hear the first 10 seconds of
each track on the CD.
1 Press FUNCTION to select Scan.
Press
FUNCTION
until
Scan
appears in the
display.
Built-in CD Player
En
18
Section
05