Pioneer RG57A6/BGEFU1, Owner'S Manual

Basic Functions

11

12

Setting the TIMER function

Basic Functions

Setting TIMER ON and 

TIMER OFF simultaneously:

Users are able to configure both the

ON and OFF settings of the timer

function. Be sure to note that the

time periods that are set for either

of the functions are the amount of

hours after the current time.

Ex:

 If the current time is 1 p.m., and 

      the user wants the system to

      turn itself on at 7 p.m. and run

      for 2 hours, they would do the

      following:

Configure the TIMER ON feature of the system to turn itself on in 6 hours:

Configure the TIMER OFF feature of the system to turn itself off in 8 hours:

Setting the TIMER function

The example on page 

11 

shows how to set the system to turn on after 6 

hours, operate for 2 hours, and then turn itself off. See the figure below:

The remote display will be as shown:

Note:

 If the user wishes to incorporate the scheduling feature, which

          will enable the ability to set specific times of each day of the

          week where the unit will turn off and on, they may purchase the 

          Pioneer Wireless Internet Access & Control Module. This accessory 

          is sold seperately, and is available at www.pioneerminisplit.com.