33
Operation
4
Operation
Radio Operations
Be sure that FM aerial is connected. (Refer to
the page 23)
Listening to the Radio
1. Press
FUNCTION
until FM appears in the
display window.
The last received station is tuned in.
2. Press and hold
TUNE(-/+)
for about two
seconds until the frequency indication
starts to change, then release. Scanning
stops when the unit tunes in a station.
or
Press
TUNE(-/+)
repeatedly.
3. Adjust the volume by rotating
VOLUME
on
the front panel or by pressing
VOL +
or
-
on
the remote control repeatedly.
Presetting the Radio Stations
You can preset 50 stations for FM.
Before tuning, make sure that you have turned
down the volume.
1. Press
FUNCTION
until FM appears in the
display window.
2. Select the desired frequency by using
TUNE(-/+).
3. Press
PGM/MEM
a preset number will fl ash
in the display window.
4. Press
PRESET (
W/S
)
to select the preset
number you want.
5. Press
PGM/MEM.
The station is stored.
6. Repeat the steps 2 to 5 to store other
stations.
Deleting all the saved stations
1. Press and hold
PGM/MEM
for two seconds.
“ERASE ALL” will fl ash up on the unit display.
2. Press
PGM/MEM
to erase all of the saved
radio stations.
Improving poor FM reception
Press
PLAY
(
d
) (ST/MONO) on the remote
control. This will change the tuner from stereo
to mono and usually improve the reception.
