VENTILATION:
When installing this unit, make sure to
leave space around the unit for ventila-
tion to improve heat radiation (at least 28
cm at top, 10 cm at rear, and 15 cm at each
side).
WARNING:
Slots and openings in the
cabinet are provided for ventilation and
to ensure reliable operation of the
product and to protect it from over-
heating, to prevent fire hazard, the open-
ings should never be blocked and covered
with items, such as newspapers, table-
cloths, curtains, etc. Also do not put the
apparatus on the thick carpet, bed, sofa,
or fabric having a thick pile.
H040 En
WARNING:
NO NAKED FLAME SOURCES, SUCH
AS LIGHTED CANDLE, SHOULD BE PLACED ON THE
APPARATUS. IF NAKED FLAME SOURCES ACCIDEN-
TALLY FALL DOWN, FIRE SPREAD OVER THE APPA-
RATUS THEN MAY CAUSE FIRE.
H044_En
Energy-saving design
This system is designed to use 0.48 W of elec-
tricity when power is switched to standby.
Operating Environment
H045_En
Operating environment temperature and
humidity: +5ºC – +35ºC (+41ºF – +95ºF);
less than 85%RH (cooling vents not blocked)
Do not install in the following locations
•
Location exposed to direct sunlight or strong arti-
ficial light
•
Location exposed to high humidity, or poorly
ventilated location
CAUTION:
THE STANDBY/ON BUTTON IS
SECONDARY CONNECTED AND THEREFORE
DOES NOT SEPARATE THE UNIT FROM MAINS
POWER IN STANDBY POSITION. therefore install
the unit suitable places easy to disconnect the
MAINS plug in case of the accident. The MAINS
plug of unit should be unplugged from the wall
socket when left unused for a long period of time.
H017B_En
HTS.book 4 ページ ２００３年４月２８日 月曜日 午後８時０分
