S-FCRW210-K
S-FCRW710-K
17
Note: Specifications and design subject to possible modification
without notice due to improvements.
9. SPECIFICATIONS
*
Measured pursuant to the Federal Trade Commission's Trade
Regulation rule on Power Output Claims for Amplifiers.
** Measured by Audio Spectrum Analyzer.
FRONT / FRONT CENTER SPEAKERS
Enclosure ............................................. Closed box type
System ............................................. 2-way loudspeaker
Drive Units
Tweeter .......................................................... 3/4” dome
Midrange ....................................... 3” cone magnetically
shielded
Nominal Impedance ............................................. 8 ohm
Frequency Range ......................................... 100-20k Hz
Sensitivity spl @ 1m/ 2.83 V ................................. 85 dB
Maximum Input Power ......................................... 100 W
External Dimensions ................... 3 7/8” x 6 3/8” x 4 7/8”
WXHXD
Weight .................................................................. 1.5 lbs
REAR / REAR CENTER SPEAKERS
Enclosure ............................................. Closed box type
System ............................................. 2-way loudspeaker
Drive Units
Tweeter .......................................................... 3/4” dome
Midrange ............................................................ 3” cone
Nominal Impedance ............................................. 8 ohm
Frequency Range ......................................... 100-20k Hz
Sensitivity spl @ 1m/ 2.83 V .................................. 85dB
Maximum Input Power ......................................... 100 W
External Dimensions ................... 3 7/8” x 6 3/8” x 4 7/8”
WXHXD
Weight .................................................................. 1.2 lbs
POWERED SUBWOOFER
Enclosure .............................. Floor standing bass-reflex
type.
Speaker ................................................... 20 cm (8 inch)
Power Amplifier .................. Continuous Average Power
Output is 100 Watts* min, at 28
ohms from 20 Hertz to 200
Hertz with no more than 1%**
total harmonic distortion.
Input ..................................... 100 mV / 18 kW (at 60 Hz)
(Sensitivity at specified frequency/impedance)
Line level input(RCA - jack)
Crossover Frequency .......................................... 150 Hz
External Dimensions ....... 9 1/4” x 14 3/16” x 16 3/16”
WXHXD
Weight ............................................................ 17 lb 6 oz
Power Requirements ........................... 120 VAC, 60 Hz
Power Consumption .................................. 64 W 130 VA
