15
S-HS01
2
1
LEVEL
MIN
MAN
LINE LEVEL
INPUT
120-127V
110V
220V
240V
VOLTAGE SELECTOR
5
3
4
6
8. PANEL FACILITIES AND SPECIFICATIONS
POWERED SUBWOOFER
8.1 PANEL FACILITIES
SDBXTW/E type
Front Panel
Rear Panel
1
Power indicator (STANDBY/ON)
Lights red when the power has been switched ON.
Lights green when the speakers receive an audio
signal. If the power is switched OFF only briefly, the
indicator lights green when power is restored. If no
signal is present for more than 9 minutes, the
subwoofer automatically reverts to standby mode and
the power indicator lights red. If, subsequently, a signal
is received, power
automatically comes back on and the power indicator
lights green.
2
POWER switch
Pressing once switches the unit ON. Press again to
switch OFF.
NOTE:
If you are planning on switching the unit OFF for a long period of
time, make sure to check that the indicator light has gone out
after switching OFF.
3
3
3
3
3
Voltage Selector (VOLTAGE SELECTOR)
SDBXTW/E type only
4
4
4
4
4
AC power cord
Connect to a AC power outlet in the wall.
5
5
5
5
5
Level knob (LEVEL)
Sets the subwoofer volume.
÷
Turn the knob slowly from the MIN position.
÷
With this unit, the bass level can be independently
set, so do not turn up the bass on the stereo
amplifier.
6
Line Level Input terminal (LINE LEVEL INPUT)
Connects to the stereo amplifier’s SUBWOOFER PRE-
OUT terminal, with the specially provided RCA plug
cord.
