S-VSL6C
SPEAKER SYSTEM
OPERATING GUIDE
SISTEMA DE ALTAVOCES
GUÍA DE OPERACIÓN
揚聲器系統
揚聲器系統
揚聲器系統
揚聲器系統
揚聲器系統
使用說明書
使用說明書
使用說明書
使用說明書
使用說明書
Thank you for buying this Pioneer product. Please read
through these operating instructions so you will know how to
operate your model properly. After you have finished reading
the instructions, put them away in a safe place for future
reference.
Before you start
• The nominal impedance of this speaker system is 6
ohms. Connect the speaker system to an amplifier with a
load impedance ranging from 4 to 16 ohms (a model with
“4 – 16
Ω
” displayed on the speaker output terminals).
In order to prevent damage to the speaker system resulting
from input overload, please observe the following precau-
tions:
• Do not supply power to the speaker system in excess of
the maximum permissible input.
• When connecting or disconnecting anything in your AV
system, make sure the amplifier is switched off.
• When using a graphic equalizer to emphasize loud
sounds in the high-frequency range, do not use excessive
amplifier volume.
• Do not try to force a low-powered amplifier to produce
loud volumes of sound (the amplifier’s harmonic
distortion will be increased, and you may damage the
speaker).
Caution: installation
• Do not place the speakers on an unstable surface. It
could present a hazard if it falls, as well as damaging the
equipment.
• Switch off and unplug your AV equipment and consult
the instructions when connecting up components. Make
sure you use the correct connecting cables.
• The speaker system grill cannot be removed. Do not try to
forcibly remove it since doing so may damage the grille.
Caution: in use
• Don’t use the speakers to output distorted sound for long
periods of times. This can result in a fire hazard.
• Do not sit or stand on the speakers or let children play on
the speakers.
• Do not put large or heavy objects on top of the speakers.
