60
07
Playback with NETWORK features
Introduction
This receiver is equipped with the LAN terminal and you can enjoy the following features by connecting your
components to these terminals.
Listening to Internet radio stations
You can select and listen to your favorite Internet radio station from the list of Internet radio stations created,
edited, and managed by the vTuner database service exclusively for use with the Pioneer products.
d
See
Playback with Network functions
on
page 61
and
Listening to Internet radio stations
on
page 61
.
Playback the music files stored in PCs
You can playback a lot of musics stored in your PCs using this unit.
!
Besides a PC, you can also play back audio files stored on your other components with the built-in media
server function based on DLNA 1.0 or DLNA 1.5 framework and protocols (i.e. network-capable hard disks and
audio systems).
d
See
Playback with Network functions
on
page 61
and
Playing back audio files stored on components on the
network
on
page 62
.
Listening to SiriusXM or Pandora
d
See
Listening to SiriusXM Internet Radio
on
page 62
.
d
See
Listening to Pandora Internet Radio
on
page 62
.
Note
!
To listen to Internet radio stations, you must sign a contract with an ISP (Internet Service Provider) beforehand.
!
Photo or video files cannot be played back.
!
With Windows Media Player 11 or Windows Media Player 12, you can even play back copyrighted audio files on
this receiver.
About playable DLNA network devices
This unit allows you to play music on media servers connected on an identical Local Area Network (LAN) as the
receiver. This unit allows for the playing of files stored on the following devices:
!
PCs running Microsoft Windows Vista or XP with Windows Media Player 11 installed
!
PCs running Microsoft Windows 7 with Windows Media Player 12 installed
!
DLNA-compatible digital media servers (on PCs or other components)
Files stored in a PC or DMS (Digital Media Server) as described above can be played via command from an exter-
nal Digital Media Controller (DMC). Devices controlled by this DMC to play files are called DMRs (Digital Media
Renderers). This receiver supports this DMR function. When in the DMR mode, such operations as playing and
stopping files can be performed from the external controller. Volume adjustment and the muting control are also
possible. The DMR mode is canceled if the remote control unit is operated while in the DMR mode (aside from
certain buttons, including the
VOLUME
+
/
–
,
MUTE
and
DISP
).
!
Depending on the external controller being used, playback may be interrupted when the volume is adjusted
from the controller. In this case, adjust the volume from the receiver or remote control.
Using AirPlay on iPod touch, iPhone, iPad, and iTunes
AirPlay works with iPhone 4S, iPhone 4, iPhone 3GS, iPod touch (4th, 3rd and 2nd generations), iPad 2, iPad with
iOS 4.2 or later, and iTunes 10.1 (Mac and PC) or later.
To use AirPlay, select your receiver on your iPod touch, iPhone, iPad or in iTunes.
*
1
The receiver’s input will switch automatically to AirPlay when AirPlay is in use.
*
2
The following operations can be performed when in AirPlay mode:
!
Adjustment of the receiver’s volume from iPod touch, iPhone, iPad or iTunes.
!
Pause/resume, next/previous track, and shuffle/repeat from the remote control of the receiver.
!
Display of the currently playing track information on the receiver’s display, including artist, song and album
name.
*
1: For more information, see the Apple website (http://www.apple.com).
*
2: The receiver’s power automatically turns on when
Network Standby
at
Network Setup
is set to
ON
.
Note
!
A network environment is required to use AirPlay.
!
The receiver’s name that shows up in the AirPlay UI on iPod touch, iPhone, iPad and iTunes can be changed by
Friendly Name
from
Network Setup
.
!
AirPlay provided on this receiver has been developed and tested based on the software versions for the iPod,
iPhone, iPad and the software versions for iTunes that are indicated on the Pioneer website. AirPlay may not
be compatible with iPod, iPhone, iPad or iTunes software versions other than those indicated on the Pioneer
website.
About the DHCP server function
To play back audio files stored on components on the network or listen to Internet radio stations, you must turn
on the DHCP server function of your router. In case your router does not have the built-in DHCP server function,
it is necessary to set up the network manually. Otherwise, you cannot play back audio files stored on components
on the network or listen to Internet radio stations. See
Network Setup menu
on
page 95
for more on this.
Authorizing this receiver
This receiver must be authorized to enable playback. This happens automatically when the receiver makes a
connection over the network to the PC. If not, please authorize this receiver manually on the PC. The authorization
(or permission) method for access varies depending on the type of server currently being connected. For more
information on authorizing this receiver, refer to the instruction manual of your server.
