Pioneer sc-lx76 Operating Instructions Manual Download

Page: 56 / 132

Basic playback

If the

Bluetooth

wireless technology device’s security code is “0000”, there is no need to make the security code

setting on the receiver. Press

ADPT

to set the

ADAPTER PORT

input, then conduct the pairing operation on

the

Bluetooth

wireless technology device. If pairing is successful, there is no need to performing the pairing

operation below.

When using the AS-BT200 only: This unit complies with

Bluetooth

Specifications Ver. 2.1. When this unit and

another device equipped with

Bluetooth

wireless technology both comply with

Bluetooth

Specification Ver. 2.1,

pairing of the two may be possible without the need for inputting a password.
In this case, a passcode may be displayed on this receiver and on the device equipped with

Bluetooth

wire-

less technology. If this happens, check that the same passcode is displayed on this receiver and the device
equipped with

Bluetooth

wireless technology, then press

ENTER

. After this, also perform the connection

operation on the

Bluetooth

device to be connected. If the passcode does not match the code displayed on the

Bluetooth

device to be connected, press

RETURN

to cancel pairing, then try starting over.

Press

ADPT

to set the

ADAPTER PORT

input, then conduct the pairing operation on the

Bluetooth

wireless

technology device. If pairing is successful, there is no need to performing the pairing operation below.

Pair one unit at a time.

When connecting this receiver by

Bluetooth

connections with a device equipped with the

Bluetooth

function to

listen to music, do not connect any devices other than this receiver by

Bluetooth

connection to the

Bluetooth

equipped device. If a

Bluetooth

connection is already established with a device other than this receiver, discon-

nect the other device before connecting this receiver.

1 Press ADPT on the remote control to switch the receiver to ADAPTER PORT input.
2 Press TOP MENU to select Bluetooth Setup.
3 Use

to select ‘PIN’ then press ENTER.

4 Use

to select one of PIN codes 0000, 1234 or 8888, then press ENTER.

You can use any of

0000

1234

8888

PIN codes.

Bluetooth

wireless technology device using any other PIN

code cannot be used with this receiver.

5 Press the RETURN button twice to exit Bluetooth Setup.
6 Switch on the

Bluetooth

wireless technology device that you want to make pair, place it

near the receiver and set it to the pairing mode.
7 From the

Bluetooth

wireless technology device list, select

Bluetooth

ADAPTER and enter

the PIN code selected in step 4.
8 Check to see that the

Bluetooth

ADAPTER is detected by the

Bluetooth

wireless technology

device.

If the receiver and

Bluetooth

wireless technology device are not paired, start over from step 6.

Note

The PIN code may in some cases be referred to as PASSKEY.

For information on enabling pairing on the

Bluetooth

wireless technology device, connection procedures, etc.,

see the

Bluetooth

wireless technology device’s operating instructions.

Listening to music contents of a

Bluetooth

wireless technology device with

your system

1 Press ADPT on the remote control to switch the receiver to ADAPTER PORT input.
2 From the

Bluetooth

wireless technology device, perform the operation to connect to the

Bluetooth

ADAPTER.

When the

Bluetooth

ADAPTER is not plugged into the

ADAPTER PORT

No Adapter

will be displayed if

ADAPTER PORT

input is selected.

3 Start playback of music contents stored on the

Bluetooth

wireless technology device.

This receiver’s remote control buttons can be used for basic playback of files stored on

Bluetooth

wireless tech-

nology devices.

Bluetooth

wireless technology device should be compatible with AVRCP profile.

Depending on the

Bluetooth

wireless technology device you use, operation may differ from what is shown in

the remote control buttons.

4 While listening to a source, set the remote control to the receiver operation mode, then
press ADV SURR repeatedly to select SOUND RETRIEVER AIR.

The

Bluetooth

word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of

such marks by PIONEER CORPORATION is under license. Other trademarks and trade names are those of their
respective owners.

Air Jam

Air Jam - a Pioneer-exclusive application and available for free.
Air Jam lets you connect multi compatible devices to this unit using Bluetooth wireless technology. With it, you
can make a group playlist directly on a supported device to play in your home theater through the unit. You and
your friends can add songs from your devices to the playlist. Also Air Jam lets you delete the song before anyone
has to hear it.

1 Press ADPT on the remote control to switch the receiver to ADAPTER PORT input.
2 Press TOP MENU to select Bluetooth Setup.
3 Use

to select ‘Air Jam’ then press ENTER.

4 Use

to select ‘Air Jam ON’ then press ENTER.

5 Press the RETURN button twice to exit Bluetooth Setup.

For more details of using Air Jam, access to our website.
http://pioneer.jp/product/soft/iapp_airjam/en.html