45
Connecting your equipment
03
Multi-zone connection using the HDMI terminal and speaker terminals
(HDZONE)
Important
!
The settings must be changed at
ZONE Setup
in order to use the
HDZONE
function (
).
!
To use the
HDZONE
functions, set
Control
or
Control Mode
in
HDMI Setup
to
OFF
. For details, see
!
It is neccessary to set the
Speaker System
to
7.2ch + HDZONE
,
5.2 Bi-Amp+HDZONE
, or
5.2 +ZONE 2+HDZONE
(
).
1 Connect the speakers to the EXTRA 1 terminals, or the SURROUND BACK terminals.
Which speaker terminal is connected defers depending on the
Speaker System
(
) setting. For details,
Installing your speaker system
The following diagram shows the connection with the
EXTRA 1
speaker terminals.
2 Connect a TV monitor to the HDMI OUT 3 (HDZONE) terminal on this receiver.
3
(HDZONE)
2
1
MAIN
SELECTABLE
HDMI OUT
EXTRA 1
R
L
ARC CONTROL
3
(HDZONE)
2
1
MAIN
SELECTABLE
HDMI OUT
EXTRA 1
R
L
ARC CONTROL
R
L
HDMI IN
2
1
Sub zone (
HDZONE
)
Main zone
Connecting to the network through LAN interface
By connecting this receiver to the network via the LAN terminal, you can listen to Internet radio stations. To listen
to Internet radio stations, you must sign a contract with an ISP (Internet Service Provider) beforehand.
When connected in this way, you can play audio files stored on the components on the local network, including
your computer.
NETWORK
HDMI OUT
NETWORK
WAN
3
2
1
LAN
Internet
Modem
Router
LAN cable (sold separately)
to LAN port
to LAN port
Computer
NAS
Connect the LAN terminal on this receiver to the LAN terminal on your router (with or without the built-in DHCP
server function) with a straight LAN cable (CAT 5 or higher).
Turn on the DHCP server function of your router. In case your router does not have the built-in DHCP server func-
tion, it is necessary to set up the network manually. For details, see
.
LAN terminal specifications
!
LAN terminal : Ethernet jack (10BASE-T/100BASE-TX)
Notes
!
When connecting to the network via wireless LAN, or when using the
Bluetooth
feature, use with the wireless
antenna upright.
!
The range limit of the wireless antenna is indicated in the following diagram. Applying unneccessary force may
result in damage.
Wireless antenna
!
Refer to the operation manual of the equipment you have as the connected equipment and connection method
may differ depending on your Internet environment.
!
When using a broadband Internet connection, a contract with an Internet service provider is required. For
more details, contact your nearest Internet service provider.
