Pioneer SP-SB03, Operating Instructions Manual

hOw tO OPtImIZE thE SOUND whEN  
tV SPEAkErS ArE ON

you should hear sound from the bar. if you don’t, turn 
up the volume on the bar using its volume control but-
tons. if your bar is connected to your tv, there’s a very 
good chance your tv speakers are also playing. it’s 
impossible to give specific instructions on how to turn 
off the speakers for every tv, but here’s a way to do it 
that covers many of the tvs out there.
1. on your tv remote control, find a “menu”  

or “setup” button.

2. press this button. you should see an  

on-screen menu.

3. next, look for an option to control audio  

functions and select it. 

the setting to turn off your tv’s internal speakers should  
be here. if you can’t turn off your tv internal speakers, 
don’t worry. to enjoy the best performance from your 
bar, you’ll want it to play louder than your tv. 

use the following steps to adjust the volume balance 
between your tv and the bar:
1. if necessary, program your bar to respond to the 

volume up and down control commands of your 
tv remote. 

2. turn your tv volume all the way down using the 

control buttons on your tv.

3. then, using the volume keys on your speaker  

bar set the volume to a normal listening level  
(do not use the remote control). after you make 
these adjustments, your speaker bar should 
always be louder than your tv speakers.  
then use the tv remote control to adjust the 
volume as you normally do.

CUStOmEr SErVICE/tEChNICAl SUPPOrt:

For assistance with basic set up, operation,  

or troubleshooting, you may contact our  

customer service hotline at:
1 (800) 421-1404  

Hours: Monday-Friday10:30 am-7:00 pm est

dimensions

35.98" W x 4.05" H x 4.74" d

cabinet

caRB2 MdF Wood

Finish

Black ash vinyl

Frequency Range

45Hz - 20kHz

drivers: Mid-Woofer

3" x 4 (2 per side)

drivers: tweeter

1" x 2 (1 per side)

power output

6 x 28 Watts (1kHz 1% tHd @ 4 ohms)

inputs

toslink optical x 1, analog x 1

Bluetooth

®

a2dp Wireless 2.4 gHz

voltage inputs

100v - 240v

power consumption

60 Watts

power consumption (standby)

2 Watts power off/4 Watts auto power off

power consumption (Main power switch off)

0 Watts

speakeR BaR

dimensions

9.01" W x 10.01" H x 9.01" d

cabinet

caRB2 MdF Wood

Finish

Black ash vinyl

driver

6.5" Woofer

voltage input

100v-240v

power output

50 Watts (50Hz 1% tHd @ 6 ohms)

power consumption

60 Watts

power consumption (standby)

1 Watt

suBWooFeR

11

English

SPECIFICATIONS

Dimensions

28” W x 4.8” H x 16” D

Cabinet

CARB2 MDF Wood

Finish

Black Ash Vinyl

Frequency Range

58Hz - 20kHz

Drivers: Woofer

4” x 2 (Bottom mount)

Drivers: Midrange

3” x 2 (1 Per Side)

Drivers: Tweeter

1” x 2 (1 Per Side)

Power Output

6 x 28 Watts (1kHz 1% THD @ 4 Ohms)

Inputs

Toslink Optical x 1, Analog x 1

Bluetooth

®

A2DP Wireless 2.4 gHz

Voltage Inputs

100v - 240v 

Power Consumption (Standby)

0.5 Watts

Power Consumption (Main Power Switch Off)

0 Watts

Complies with California Code of Regulations, CCR 93120.2(a) Phase 2. 

Specifications and designed subject to modification without notice. 

PIONEER, the Pioneer logo, and the A. JONES logo are registered trademarks of Pioneer Corporation. 

Bluetooth is a registered trademark of Bluetooth SIG, Inc. Bluetooth functionality requires a compatible A2DP profile Bluetooth-

enables device. Certain Bluetooth features may not be supported by all compatible Bluetooth-enabled devices, and/or the 

functionality of such features may be limited in certain devices.