background image

Connecting the system

Connecting the system

Connecting the power cord (2)

 Note

The position of the parking brake 

switch varies depending on the 

vehicle model. For details, consult 

your authorized Pioneer dealer or 

an installation professional.

Violet/white (REVERSE GEAR SIGNAL INPUT)

This is connected so that the this product can detect 
whether the vehicle is moving forwards or backwards. 
Connect the violet/white lead to the lead whose 
voltage changes when the reverse gear is engaged. 
Unless connected, the sensor may not detect your 
vehicle traveling forward/backward properly, and thus 
the position of your vehicle detected by the sensor 
may be misaligned from the actual position.

  

 WARNING

LIGHT GREEN LEAD AT POWER CONNECTOR IS 

DESIGNED TO DETECT PARKED STATUS AND 

MUST BE CONNECTED TO THE POWER SUPPLY 

SIDE OF THE PARKING BRAKE SWITCH. 

IMPROPER CONNECTION OR USE OF THIS 

LEAD MAY VIOLATE APPLICABLE LAW AND 

MAY RESULT IN SERIOUS INJURY OR DAMAGE.

 Note

When you use a rear view camera, please 

make sure to connect this lead. Otherwise 

you cannot switch to the rear view camera 

picture.

Power cord

Power supply side

Ground side

Parking brake switch

Connection method

Clamp the lead of the power supply  
side of the parking brake switch.

Clamp firmly with needle-nosed 
pliers.

Light green (PARKING BRAKE)

Used to detect the ON/OFF status of the 
parking brake. This lead must be connected 
to the power supply side of the parking 
brake switch.

If this connection is made incorrectly or 
omitted, certain functions of this 
product will be unusable.

This product

When connecting to separately sold power amp/subwoofer





This product

Front outputs (FL, FR)

Subwoofer/rear outputs  
(SW/RL, SW/RR)

Power cord

RCA cables
(sold separately)

Power amp
(sold separately)

Power amp
(sold separately)

System remote control

Left

Right

Front speaker

Front speaker

Subwoofer or 
Rear speaker

Subwoofer or 
Rear speaker

Blue/white

To system control terminal of the 
power amp (max. 300 mA 12 V DC).

 Note

You can change the RCA output of the subwoofer depending 

on your subwoofer system. (Refer to the Operation Manual.)

Summary of Contents for SPH-DA210




















Reviews: