When you connect separately sold multi-channel processor
(DEQ-P7050) to this unit, do not connect anything to the
speaker leads and system remote control (blue/white).
Note:
• The position of the parking brake switch depends
on the vehicle model. For details, consult the
vehicle Owner’s Manual or dealer.
Connection method
Clamp the lead.
1.
2. Clamp firmly with
needle-nosed
pliers.
Blue/white
To system control terminal of the power amp
or Auto-antenna relay control terminal
(max. 300 mA 12 V DC).
With a 2 speaker system, do not connect anything
to the speaker leads that are not connected to speakers.
Parking brake
switch
Power supply side
Ground side
Light green
Used to detect the ON/OFF status of the parking brake.
This lead must be connected to the power supply side of the parking
brake switch.
Antenna jack
Violet
Black
Black
1.5 m
Antenna cable (supplied)
2 m
26 pin cable (supplied)
21 pin cable (supplied)
Yellow
To terminal always supplied
with power regardless of
ignition switch position.
Fuse holder
Fuse resistor
Red
To electric terminal controlled
by ignition switch (12 V DC)
ON/OFF.
Black (ground)
To vehicle (metal) body.
Orange/white
To lighting switch terminal.
White
White/black
Gray
Gray/black
Green
Green/black
Violet
Violet/black
Front speaker
Rear speaker
Front speaker
Rear speaker
Fuse resistor
Multi-CD player
(sold separately)
IP-BUS cable
Violet
15 cm
15 cm
This product
IP-BUS input (Blue)
Left
Right
+
≠
+
≠
+
≠
+
≠
Hide-away unit
Yellow/black
If you use a cellular telephone, connect it via the
Audio Mute lead on the cellular telephone. If not,
keep the Audio Mute lead free of any connections.
Note:
Change the initial setting of this product
(refer to the Operation Manual).
The subwoofer output of this unit is monaural.
Note:
When you connect DEQ-P7050 to this unit,
separately sold power amp must be connected
to DEQ-P7050.
When you connect separately sold
multi-channel processor (DEQ-P7050)
to this unit, do not connect anything to the
speaker leads and system remote control
(blue/white).
Blue/white
To system control terminal of the power amp
or Auto-antenna relay control terminal
(max. 300 mA 12 V DC).
This product
Front output
(FRONT OUTPUT)
Subwoofer output
or non fading output
(SUBWOOFER OUTPUT or
NON-FADING OUTPUT)
Rear output
(REAR OUTPUT)
Power amp
(sold separately)
Power amp
(sold separately)
Power amp
(sold separately)
+
≠
+
≠
+
≠
+
≠
+
≠
+
≠
System remote control
RCA cables
(sold separately)
Front speaker
Rear speaker
Subwoofer
Front speaker
Rear speaker
Subwoofer
Left
Right
15 cm
23 cm
15 cm
Perform these connections when using
the optional amplifier.
Connecting the power cord
Fig. 2
When connecting to separately sold power amp
Fig. 3
Connecting the Units
<ENGLISH>
Connecting the Units
<ENGLISH>
