Turning the clockdisplay
on or off
You can turn the clock display on or off.
%
Press CLOCK to turn the clock display
on or off.
Each press of
CLOCK
turns the clock display
on or off.
#
The clock display disappears temporarily
when you perform other operations, but the clock
display appears again after 25 seconds.
Note
Even when the sources are off, the clock display
appears on the display. Pressing
CLOCK
turns
the clock display on or off.
Using the AUX source
This unit can control up to two auxiliary equip-
ments such as VCR or portable devices (sold
separately). When connected, auxiliary equip-
ments are automatically read in as AUX
sources and assigned to
AUX1
or
AUX2
. The
relationship between
AUX1
and
AUX2
sources is explained below.
About
AUX1
and
AUX2
You have two methods to connect auxiliary
equipments to this unit.
AUX1
source:
When connecting auxiliary equipment using a
stereo mini plug cable
%
Insert the stereo mini plug into the
input jack on this unit.
For more details, refer to the installation man-
ual.
The allocation of this auxiliary equipment is
automatically set to
AUX1
.
AUX2
source:
When connecting auxiliary equipment using an
IP-BUS-RCA Interconnector (sold separately)
%
Use an IP-BUS-RCA Interconnector such
as the CD-RB20/CD-RB10 (sold separetely)
to connect this unit to auxiliary equipment
featuring RCA output.
For more details, refer to the IP-BUS-RCA Inter-
connector owner's manual.
The allocation of this auxiliary equipment is
automatically set to
AUX2
.
#
You can only make this type of connection if
the auxiliary equipment has RCA outputs.
Selecting AUX as the source
Auxiliary equipments connected to this unit
can be activated or deactivated individually.
%
Press SOURCE to select AUX (AUX1 or
AUX2) as the source.
Press
SOURCE
until
AUX
appears in the dis-
play.
#
If the auxiliary setting is not turned on,
AUX
cannot be selected. For more details, see
Switch-
ing the auxiliary setting
on page 37.
Setting the AUX title
The title displayed for each
AUX1
or
AUX2
source can be changed.
1 After you have selected AUX as the
source, press FUNCTION and hold until
TITLE IN appears in the display.
Other Functions
En
39
English
Section
10