Listening to the radio
1 2
5
3
4
These are the basic steps necessary to operate
the radio. More advanced tuner operation is
explained starting on the next page.
This unit
s AF (alternative frequencies search)
function can be turned on and off. AF should
be off for normal tuning operation (refer to
page 19).
1
LOC indicator
Shows when local seek tuning is on.
2
Stereo (
5
) indicator
Shows that the frequency selected is being
broadcast in stereo.
3
Preset number indicator
Shows which preset has been selected.
4
Band indicator
Shows which band the radio is tuned to,
MW, LW or FM.
5
Frequency indicator
Shows to which frequency the tuner is
tuned.
1 Press SOURCE to select the tuner.
Press
SOURCE
until you see
Tuner
displayed.
2 Press BAND/ESC to select a band.
Press
BAND/ESC
until the desired band is dis-
played,
FM1
,
FM2
,
FM3
for FM or
MW/LW
.
3 To perform manual tuning, push
MULTI-CONTROL left or right.
The frequencies move up or down step by
step.
4 To perform seek tuning, push and hold
MULTI-CONTROL left or right for about one
second and release.
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
#
You can cancel seek tuning by pushing
MULTI-CONTROL
left or right.
#
If you push and hold
MULTI-CONTROL
left or
right you can skip stations. Seek tuning starts as
soon as you release
MULTI-CONTROL
.
Tuner
En
15
English
Section
04
