5 Push MULTI-CONTROL right to move
the cursor to the next character position.
When the letter you want is displayed, push
MULTI-CONTROL
right to move the cursor to
the next position and then select the next let-
ter. Push
MULTI-CONTROL
left to move back-
wards in the display.
6Move the cursor to the last position by
pushing MULTI-CONTROL right after enter-
ing the title.
When you push
MULTI-CONTROL
right one
more time, the entered title is stored in mem-
ory.
7 Press BAND/ESC to return to the play-
back display.
Notes
!
Titles remain in memory, even after the disc
has been removed from the unit, and are re-
called when the disc is reinserted.
!
After data for 48 discs has been stored in
memory, data for a new disc will overwrite the
oldest one.
!
If you connect a multi-CD player, you can
input disc titles for up to 100 discs.
Using CD TEXT functions
Some discs have certain information encoded
on the disc during manufacture. These discs
may contain such information as the CD title,
track title, artist
s name and playback time
and are called CD TEXT discs. Only these spe-
cially encoded CD TEXT discs support the
functions listed below.
Displaying titles on CD TEXT discs
%
Press DISPLAY.
Press
DISPLAY
repeatedly to switch between
the following settings:
: track title
: disc title and : disc artist
name
: disc artist name and : track title
: track title and : track artist name
:
track artist name and : track title
#
If specific information has not been recorded
on a CD TEXT disc, title or name is not displayed.
Scrolling titles in the display
This unit can display the first 14 (22) letters of
disc title, disc artist name, track title and track
artist name. When the text information is long-
er than 14 (22) letters, you can scroll the dis-
play as follows.
%
Press DISPLAY and hold until the title
begins to scroll through the display.
The titles scroll.
Note
When Ever Scroll is set to ON at the initial setting,
CD text information scrolls continuously in the
display. If you want to display the first 14 (22)
characters of text information temporarily and
scroll from the beginning, press and hold
DISPLAY
. About Ever Scroll, refer to
Switching
the Ever Scroll
on page 71.
Selecting tracks from the track
title list
Track title list lets you see the list of track titles
on a CD TEXT disc and select one of them to
play back.
1 Turn MULTI-CONTROL to switch to the
track title list mode.
2 Use MULTI-CONTROL to select the de-
sired track title.
Turn to change the track title; press to play.
#
You can also change the track title by pushing
MULTI-CONTROL
up or down.
#
To return to the playback display, press
BAND/ESC
.
Built-in CD Player
En
28
Section
06
