2 Press MULTI-CONTROL to select the
search method.
Press
MULTI-CONTROL
until the desired
search method appears in the display.
!
FF/REV
Fast forward and reverse
!
ROUGH
Searching every 10 tracks
Searching every 10 tracks in
the current folder
If the current folder contains over 10 tracks,
you can search every 10 tracks. When one
folder contains a lot of tracks, you can roughly
search for the track you want to play.
1 Select the search method ROUGH.
Refer to
Selecting the search method
on the
previous page.
2 Push and hold MULTI-CONTROL left or
right to search every 10 tracks in the cur-
rent folder.
#
If the current folder contains less than 10
tracks, pushing and holding
MULTI-CONTROL
right recalls the last track of the folder. Also, if the
remaining number of tracks after searching every
10 tracks is less than 10, pushing and holding
MULTI-CONTROL
right recalls the last track of
the folder.
#
If the current folder contains less than 10
tracks, pushing and holding
MULTI-CONTROL
left recalls the first track of the folder. Also, if the
remaining number of tracks after searching every
10 tracks is less than 10, pushing and holding
MULTI-CONTROL
left recalls the first track of the
folder.
Switching the tag display
It is possible to turn the tag display on or off, if
MP3/WMA disc contains text information
such as track title and artist name.
!
If you turn the tag display off, time to play-
back will be shorter than when this func-
tion is turned on.
1 Use MULTI-CONTROL to select
TAG READ.
The function name tag
TAG READ
is high-
lighted.
2 Press MULTI-CONTROL to turn tag dis-
play on.
Tag read mode :ON
appears in the display.
#
To turn tag display off, press
MULTI-CONTROL
again.
Note
When you turn the tag display on, the unit returns
to the beginning of the current track in order to
read the text information.
Using compression and BMX
Using the COMP (compression) and BMX
functions let you adjust the sound playback
quality of the CD player. Each of the functions
have a two-step adjustment. The COMP func-
tion balances the output of louder and softer
sounds at higher volumes. BMX controls
sound reverberations to give playback a fuller
sound. Listen to each of the effects as you se-
lect through them and use the one that best
enhances the playback of the track or CD that
you are listening to.
1 Use MULTI-CONTROL to select
COMP/BMX.
The function name tag
COMP/BMX
is high-
lighted.
MP3/WMA/WAV Player
En
33
English
Section
07
