Playing a CD
1
4
3
2
You can use this unit to control a multi-CD
player, which is sold separately.
These are the basic steps necessary to play a
CD with your multi-CD player. More advanced
CD operation is explained starting on the next
page.
1
Play time indicator
Shows the elapsed playing time of the cur-
rent track.
2
Disc number indicator
Shows the disc currently playing.
3
Track number indicator
Shows the track currently playing.
4
Disc title indicator
Shows the title of the currently playing disc.
!
If no title has been entered for the cur-
rently playing disc, nothing is displayed.
1 Press SOURCE to select the multi-CD
player.
Press
SOURCE
until you see
Multi CD
dis-
played.
2 Select a disc you want to listen to with
the 1
6buttons.
For discs located at 1 to 6, press the corre-
sponding button number.
If you want to select a disc located at 7 to 12,
press and hold the corresponding numbers,
such as
1
for disc 7, until the disc number ap-
pears in the display.
#
You can also sequentially select a disc by
pushing
MULTI-CONTROL
up or down.
3 To perform fast forward or reverse,
push and hold MULTI-CONTROL left or
right.
4 To skip back or forward to another
track, push MULTI-CONTROL left or right.
Pushing
MULTI-CONTROL
right skips to the
start of the next track. Pushing
MULTI-CONTROL
left once skips to the start
of the current track. Pushing again will skip to
the previous track.
Notes
!
When the multi-CD player performs the pre-
paratory operations,
Ready
is displayed.
!
If the multi-CD player does not operate prop-
erly, an error message such as
ERROR-11
may be displayed. Refer to the multi-CD player
owner
s manual.
!
If there are no discs in the multi-CD player ma-
gazine,
No disc
is displayed.
!
When you select a disc, the disc and track ti-
tles automatically begin to scroll in the dis-
play. When Ever Scroll function is ON at the
initial setting, the disc and track titles scroll
continuously. About Ever Scroll, refer to
Switching the Ever Scroll
on page 71.
Selecting a track directly
When using the remote control, you can select
a track directly by entering the desired track
number.
1 Press DIRECT.
Track number input display appears.
Multi-CD Player
En
36
Section
08
