2 Push MULTI-CONTROL left or right to
select the speaker unit (filter) to be ad-
justed.
Each pushing
MULTI-CONTROL
left or right
selects the speaker unit (filter) in the following
order:
Low LPF
(low-range speaker LPF)
Mid HPF
(middle-range speaker HPF)
Mid LPF
(mid-
dle-range speaker LPF)
High HPF
(high-
range speaker HPF)
3 Press and hold MULTI-CONTROL to
mute the selected speaker unit (filter).
MUTE
blinks in the display.
#
To cancel the muting, press
MULTI-CONTROL
again.
Adjusting network
1 Use MULTI-CONTROL to select NW 1.
The function name tag
NW 1
is highlighted.
2 Push MULTI-CONTROL left or right to
select the speaker unit (filter) to be ad-
justed.
Each pushing
MULTI-CONTROL
left or right
selects the speaker unit (filter) in the following
order:
Low LPF
(low-range speaker LPF)
Mid HPF
(middle-range speaker HPF)
Mid LPF
(mid-
dle-range speaker LPF)
High HPF
(high-
range speaker HPF)
3 Turn MULTI-CONTROL to select NW 2.
The function name tag
NW 2
is highlighted.
4 Push MULTI-CONTROL left or right to
select the cut-off frequency (crossover fre-
quency) of the selected speaker unit (fil-
ter).
Each pushing
MULTI-CONTROL
left or right
selects cut-off frequencies (crossover frequen-
cies) in the following order:
Low LPF
:
31.5
40
50
63
80
100
125
160
200
(Hz)
Mid HPF
:
31.5
40
50
63
80
100
125
160
200
(Hz)
Mid LPF
:
1.6
2
2.5
3.15
4
5
6.3
8
10
12.5
16
(kHz)
High HPF
:
1.6
2
2.5
3.15
4
5
6.3
8
10
12.5
16
(kHz)
5 Push MULTI-CONTROL up or down to
adjust the level of the selected speaker
unit (filter).
Each pushing
MULTI-CONTROL
up or down
increases or decreases the level of the se-
lected speaker unit (filter).
±0dB
24dB
is displayed as the level is in-
creased or decreased.
+6dB
24dB
is displayed as the level is in-
creased or decreased, only if you have se-
lected
Low LPF
.
6Turn MULTI-CONTROL to select NW 3.
The function name tag
NW 3
is highlighted.
7 Push MULTI-CONTROL left or right to
select the slope of the selected speaker
unit (filter).
Each pushing
MULTI-CONTROL
left or right
selects slopes in the following order:
Low LPF
:
36
30
24
18
12
(dB/
oct.)
Mid HPF
:
24
18
12
6
Pass (0)
(dB/oct.)
Mid LPF
:
24
18
12
6
Pass (0)
(dB/oct.)
High HPF
:
24
18
12
6
(dB/oct.)
8 Turn MULTI-CONTROL to select NW 4.
The function name tag
NW 4
is highlighted.
9 Press MULTI-CONTROL to switch the
phase of the selected speaker unit (filter).
Each press of
MULTI-CONTROL
switches the
phase between
Normal
(normal) and
Reverse
(reverse).
Audio Adjustments
En
59
English
Section
12
