Bluetooth Audio
Basic Operations
2
2
2
1
1
1
3
3
3
!
If you connect a Bluetooth adapter (e.g. CD-
BTB200) to this unit, you can control Blue-
tooth audio players via Bluetooth wireless
technology.
!
In some countries, CD-BTB200 is not sold
on the market.
Important
!
Depending on the Bluetooth audio player con-
nected to this unit, the operations available
with this unit are limited to the following two
levels:
—
A2DP profile (Advanced Audio Distribution
Profile): Only playing back songs on your
audio player is possible.
—
AVRCP profile (Audio/Video Remote Con-
trol Profile): Playing back, pausing, select-
ing songs, etc., are possible.
!
Since there are a number of Bluetooth audio
players available on the market, operations
with your Bluetooth audio player using this
unit vary extensively. Refer to the instruction
manual that came with your Bluetooth audio
player as well as this manual while operating
your player on this unit.
!
Information about songs (e.g. the elapsed
playing time, song title, song index, etc.) can-
not be displayed on this unit.
!
While you are listening to songs on your Blue-
tooth audio player, refrain from using on your
cellular phone as much as possible. If you use
your cellular phone, the signal from your cel-
lular phone may cause noise on the song play-
back.
!
When you are talking on a cellular phone con-
nected to this unit via Bluetooth wireless tech-
nology, song playback from your Bluetooth
audio player connected to this unit is muted.
!
Even if you are listening to a song on your
Bluetooth audio player and you switch to an-
other source, song playback continues.
For details concerning operation, refer to the
Bluetooth adapter
’
s operation manual. This
section provides brief information on Blue-
tooth audio player operations with this unit,
which slightly differs or is abbreviated from
that described in the Bluetooth adapter
’
s op-
eration manual.
!
Even though your audio player does not
contain a Bluetooth module, you can still
control it from this unit via Bluetooth wire-
less technology. To control your audio
player using this unit, connect a product
featuring Bluetooth wireless technology
(available on the market) to your audio
player and connect the Bluetooth adapter
(e.g. CD-BTB200) to this unit.
1
Source icon
Shows which source has been selected.
2
Connection indicator
Shows the Bluetooth wireless connection
status.
3
Device name
Shows the device name of the connected
Bluetooth audio player (or Bluetooth adap-
ter).
1
Touch the source icon and then touch
BT Audio to select the Bluetooth audio
source.
#
For this unit to control your Bluetooth audio
player it needs to establish a Bluetooth wireless
connection. (Refer to
Connecting a Bluetooth
audio player
on the next page.)
Available accessories
En
73
Section
19
A
vailable
accessories