!
If you select
A
/
B
and if in case you need to
operate other Pioneer units (may be avail-
able in the future), take the following proce-
dure and change the code type to the
appropriate type.
2
Press 0 and CLEAR on the remote con-
trol simultaneously to change the code
type.
Initially, the code type is set to
A
. Each time
you press
0
and
CLEAR
simultaneously on the
remote control the code type switches be-
tween
A
and
B
.
Using the preprogrammed
function
You can operate the preprogrammed functions
for each source by using
PGM
.
!
In order to use
PGM
button for prepro-
grammed function, the remote control op-
eration mode switch should be set to
AVH
.
%
Press PGM to turn pause on when se-
lecting the following sources:
!
DVD-V
–
Built-in DVD player
!
M-CD
–
Multi-CD player
!
iPod
–
iPod
!
BT Audio
–
Bluetooth audio player
#
To turn pause off, press
PGM
again.
%
Press PGM and hold to turn BSM on
when selecting TUNER as the source.
Press
PGM
and hold until the BSM turns on.
#
To cancel the storage process, press
PGM
again.
%
Press PGM and hold to turn BSSM on
when selecting TV as the source.
Press
PGM
and hold until the BSSM turns on.
#
To cancel the storage process, press
PGM
again.
%
Press PGM to switch the channel select
modes when selecting XM or SIRIUS as the
source.
Press
PGM
repeatedly to switch between
ALL CH
and
CATEGORY
.
Other Functions
En
112
Section
23