2
Use MULTI-CONTROL to store the se-
lected station in memory.
Turn to change the preset number. Press and
hold to store.
The XM preset number you have selected will
flash and then remain lit. The selected station
has been stored in memory.
3
Use MULTI-CONTROL to select the de-
sired station.
Turn to change the station; press to select.
#
You can also change the station by pushing
MULTI-CONTROL
up or down.
#
If you do not operate the list within about 30
seconds, the display is automatically returned to
the ordinary display.
Note
You can also recall stations assigned to preset
tuning numbers by pushing
MULTI-CONTROL
up
or down.
Switching the XM channel
select mode
You have two methods for selecting a channel:
by number and by category. When selecting
by number, channels in any category can be
selected. Select by category to narrow your
search down to only channels in a particular
category.
%
Press SAT MODE repeatedly to select
the desired channel select setting.
MODE CH NUMBER
(channel number select
setting)
—
MODE CATEGORY
(channel cate-
gory select setting)
#
If you do not operate the function within about
30 seconds, the display is automatically returned
to the channel display.
Note
You can also perform this operation in the menu
that appears by using
MULTI-CONTROL
.
Selecting a channel in the channel
category
1
Select the channel select settings to
MODE CATEGORY.
Refer to
Switching the XM channel select mode
on this page.
2
Push MULTI-CONTROL up or down to
select the desired channel category.
3
Push MULTI-CONTROL left or right to
select the desired channel in the selected
channel category.
Displaying the Radio ID
Channel number select setting
1
Select the channel select settings to
MODE CH NUMBER.
Refer to
Switching the XM channel select mode
on this page.
2
Push MULTI-CONTROL left or right to
select RADIO ID.
#
If you select another channel, display of the ID
code is canceled.
#
Display of the ID code repeats displaying
RADIO ID
and the ID code one after the other.
SIRIUS Satellite Radio tuner
Listening to SIRIUS Satellite Radio
You can use this unit to control a SIRIUS Satel-
lite Radio tuner, which is sold separately.
When the SIRIUS tuner is used together with
this unit, some operations differ slightly from
those described in the SIRIUS operation man-
ual. This manual provides information on
these points. For all other information on
using the SIRIUS tuner, please refer to the SIR-
IUS operation manual.
%
Select a SIRIUS band.
Band can be selected from
SR-1
,
SR-2
or
SR-3
.
Available accessories
En
44
Section
06
