TV tuner
Basic Operations
You can use this unit to control a TV tuner,
which is sold separately.
For details concerning operation, refer to the
TV tuner
’
s operation manual. This section pro-
vides information on TV operations with this
unit, which differs from that described in the
TV tuner
’
s operation manual.
%
Select a band
Press
BAND/ESC
.
%
Select a channel (step by step)
Push
MULTI-CONTROL
left or right.
%
Seek tuning
Push and hold
MULTI-CONTROL
left or right,
and then release.
Notes
!
Band can be selected from
TV1
or
TV2
.
!
You can cancel seek tuning by pushing
MULTI-CONTROL
left or right.
!
While pushing and holding
MULTI-CONTROL
left or right, you can skip stations. Seek tuning
starts as soon as you release
MULTI-CONTROL
.
Storing and recalling broadcast
stations
You can easily store up to 12 broadcast sta-
tions for later recall.
!
12 stations for each band can be stored in
memory.
1
Press LIST.
Preset screen is displayed.
2
Use MULTI-CONTROL to store the se-
lected station in memory.
Turn to change the preset number. Press and
hold to store.
#
You can also store the station in memory by
pushing and holding
MULTI-CONTROL
right.
3
Use MULTI-CONTROL to select the de-
sired station.
Turn to change the station. Press to select.
#
You can also change the station by pushing
MULTI-CONTROL
up or down.
#
If you do not operate the list within about 30
seconds, the display automatically returns to the
ordinary display.
Storing the strongest broadcast
stations sequentially
1
Press MULTI-CONTROL to display the
main menu.
2
Use MULTI-CONTROL and select
FUNCTION to display BSSM.
#
You can also select the function by pressing
FUNCTION
on the remote control.
3
Press MULTI-CONTROL to turn BSSM
on.
SEARCH
begins to flash. While
SEARCH
is
flashing, the 12 strongest broadcast stations
are stored in order from the lowest channel
up. When finished, the preset channel list ap-
pears.
#
To cancel the storage process, press
MULTI-CONTROL
again.
4
Use MULTI-CONTROL to select the de-
sired station.
Turn to change the station. Press to select.
#
You can also change the station by pushing
MULTI-CONTROL
up or down.
#
To return to the channel display, press
BAND/ESC
.
#
If you do not operate the list within about 30
seconds, the display automatically returns to the
ordinary display.
Available accessories
En
51
English
Section
06