Connecting the unit
English
Connecting the unit
English
When using a subwoofer without using the optional amplifier
Connecting the unit
English
Connecting the unit
English
When not connecting a rear speaker leard to a subwoofer
Power amp
(sold separately)
Yellow
Connect to the constant 12 V supply terminal.
Red
Connect to terminal controlled by
ignition switch (12 V DC).
Orange/white
Connect to lighting switch terminal.
Connect with RCA cables
(sold separately)
Perform these connections
when using the optional
amplifier.
Black (chassis ground)
Connect to a clean, paint-free metal location.
Yellow/black
If you use an equipment with Mute function,
wire this lead to the Audio Mute lead on that
equipment. If not, keep the Audio Mute lead
free of any connections.
This product
Front output
Subwoofer output
Fuse (10 A)
System remote control
Left
Right
Blue/white
Connect to system control terminal of the power
amp or auto-antenna relay control terminal (max.
300 mA 12 V DC).
With a 2 speaker system, do not
connect anything to the speaker leads
that are not connected to speakers.
Front speaker
Front speaker
Rear speaker
Rear speaker
White
Gray
Gray/black
White/black
Green
Violet
Green/black
Violet/black
Power amp
(sold separately)
Antenna jack
Rear output
Front speaker
Power amp
(sold separately)
To subwoofer
output
To front output
To rear output
Front speaker
Rear speaker
Rear speaker
Subwoofer
Subwoofer
IP-BUS input (Blue)
IP-BUS cable
Multi-CD player
(sold separately)
1.5 m (4 ft. 9 in.)
USB cable
Connect to separately sold USB device.
Use a stereo mini plug
cable to connect with
auxiliary device.
AUX jack (3.5
φ
)
Wired remote input
Hard-wired remote control adaptor can
be connected (sold separately).
20 cm
(7-7/8 in.)
Left
Right
Front speaker
Front speaker
White
Gray
Gray/black
White/black
Green
Violet
Green/black
Violet/black
Green
Violet
Green/black
Violet/black
Subwoofer (4
Ω
)
Subwoofer (4
Ω
)
When using a subwoofer of 70 W (2
Ω
), be sure to connect
with Violet and Violet/black leads of this unit.
Do not connect anything with Green and Green/black leads.
Subwoofer
(4
Ω
)
2
Not used.
Note:
Change the initial setting of this unit.
The subwoofer output of this unit is monaural.
Yellow
Connect to the constant 12 V supply terminal.
Red
Connect to terminal controlled by ignition switch (12 V DC).
Orange/white
Connect to lighting switch terminal.
Black (chassis ground)
Connect to a clean, paint-free metal location.
Blue/white
Connect to system control
terminal of the power amp or
auto-antenna relay control
terminal (max. 300 mA 12 V DC).
This product
Front output
Antenna jack
Subwoofer output
Fuse (10 A)
Use a stereo mini plug
cable to connect with
auxiliary device.
AUX jack (3.5
φ
)
Rear output
IP-BUS input (Blue)
IP-BUS cable
Multi-CD player
(sold separately)
USB cable
Connect to separately sold USB device.
20 cm
(7-7/8 in.)
Wired remote input
Hard-wired remote control adaptor can
be connected (sold separately).
1.5 m (4 ft. 9 in.)
Yellow/black
If you use an equipment with Mute function, wire this lead to the Audio
Mute lead on that equipment. If not, keep the Audio Mute lead free of
any connections.
