owner’s manual
3
This manual does not include Remote Controller
Operations, see the “Remote Controller Owner's
manual”, which is packed with the unit, for further details.
Use the system with the following temperatures for safe
and effective operation. The max operation temperatures
for the air conditioner is listed. (Cooling/Heating)
3. AIR CONDITIONER OPERATIONS AND
PERFORMANCE
NOTE
Table 3-1
0°C ~ 30°C / 32 °F~86°F
17°C ~ 32°C
( 62 °F ~ 90°F)
17°C ~ 32°C
( 62 °F ~ 90°F)
Cooling Operation
Drying Operation
Heating Operation
(I+ Models)
Mode
Temperature
Outdoor
Temperature
(for the models with low
temperature cooling system)
Temperature
Room
0°C ~ 50°C / 32 °F~122°F
0°C ~ 50°C / 32 °F~122°F
-15°C ~ 50°C / 5 °F~122°F
-25°C ~ 24°C / -12 °F~76°F
Infrared Signal Receiver
Operation Lamp
Timer Indicator
Alarm Indicator
Temporary Button
Temperature Indicator
PRE-DEF Indicator (cooling and heating-
type)
or Fan-Only Indicator (cooling-only type)
Infrared Signal Receiver
Operation Lamp
Timer Indicator
Alarm Indicator
Temporary Button
Temperature Indicator
PRE-DEF Indicator (cooling and heating-
type)
or Fan-Only Indicator (cooling-only type)
Temperature Indicator
1
If the air conditioner is used outside the above conditions, it
may cause the unit to function abnormally.
The phenomenon of when the surface of the air conditioning
unit condenses with water is normal when there is a larger
relative humidity in room. Please close doors and windows.
Optimal performance will be only be achieved when within
these operating temperature ranges.
2
3
NOTE
FORCED AUTO
The OPERATION lamp is lit, and the air conditioner will run
under FORCED AUTO mode. The remote controller operation is
enabled to function according to the received signal.
1
FORCED
COOL
The OPERATION lamp flashes, the air conditioner will turn to
FORCED AUTO after it is set to cool with a wind speed of HIGH
for 30 minutes. The remote controller operation is disabled.
OFF
The OPERATION lamp goes off. The air conditioner is OFF,
while the remote controller operation is enabled.
2
3
For the inverter type, this switch is used for after-sales service
purposes only. Users should not touch it.
For the fixed-frequency type,
this function is used to operate the
unit temporarily, the remote controller is misplaced, or its
batteries have ben exhausted. Two modes, including
FORCED
AUTO and FORCED COOL, can be selected through the
TEMPORARY BUTTON on the air-in grill control box of the indoor
unit. Once you push this button, the air conditioner will run in the
following order:
FORCED
AUTO, FORCED COOL, OFF, and
back to
FORCED
AUTO.
Display Panel
Fig. 2-5
Display Panel
Fig. 2-6
Display Panel
Fig. 2-7
Display Panel
Fig. 2-4
NOTE:DEF Indicator (cooling and heating-type)
or FAN Indicator (cooling-only type)
NOTE:DEF indicator (cooling and heating-type)
or FAN Indicator (cooling-only type)
NOTE:DEF Indicator (cooling and heating-type)
or FAN Indicator (cooling-only type)
Infrared Signal Receiver
Infrared Signal Receiver
MANUAL
TIMER
ALARM
OPERATION
MANUAL
TIMER
ALARM
OPERATION
DEF./FAN
MANUAL
MANUAL
TIMER
ALARM
OPERATION
DEF./FAN
DEF./FAN
Infrared Signal Receiver
Display Panel
Fig. 2-8
FUNC
