−
23
−
English
WDR (Wide Dynamic Range): Off / On
This technology automatically adapts the image in situations where there is significant contrast between
light and dark areas.
Default setting: On
Time Stamp: Off / On
When this function is enabled, the system adds a date stamp in the video or photo that the Dash
Camera records and saves.
If this function is disabled, video recording and shooting are performed without specifying the date.
Default setting: On
G-Sensor: Off / Low / Mid / High
In the event of a collision, the G-sensor automatically protects the video file from being overwritten, and
then the video data cannot be erased even when the loop recording function is on.
Default setting: Mid
Microphone / Sound Recording: On / Off
Allows you to disable audio recording. In this case, video recording is performed without sound.
Default setting: Off
License Plate: On / Off
When enabled, the system will include your license plate stamp in the video.
If this function is disabled, the video is recorded without specifying the license plate.
Default setting: Off
SOS (Event) Recording
Automatic Recording by Detecting Impacts (Event Recording)
The video recording file when an impact is detected by this product (the Dash Camera), such as an
impact with another vehicle, is recorded as an event video file.
The number of event video files and recording times will differ depending on when an impact is detected.
If an impact is detected, then the file records for the Video Clip Length (set by the user) after the impact
is detected are recorded as an SOS (Event) video files.
Manual Recording (Manual Event Recording)
If manual record button is pressed during video recording, then this is recorded as a video file for Video
Clip Length (set by the user), with the same specifications as an event recording.
Notes
• You can adjust the sensitivity for detecting impacts.
→
“This product Settings” - “Configurable Features” - “Recording Setting” - “G-Sensor
Sensitivity