−
39
−
English
Setting
Category
Setting
Details
Set value
Parking
Mode
Parking Mode
Video Length
Sets the operation time of Parking Mode. This
can also be set to OFF.
→
“Parking Mode”
[10 min]/[ 30 min]/
[40 min]
/[OFF]
G-Sensor
Sensitivity
Sets the sensitivity for detecting vibration or
impact.
[1] to [6]
[4]
LED Indicator
Sets whether or not to light the LED indicator
when Parking Mode or Security Mode is activated.
[ON]
/[OFF]
Security Mode
Sets whether or not to use Security Mode.
→
“Using this product” - “Parking Mode” -
“Security Mode”
[ON]
/[OFF]
Voltage
Monitoring
Sets to automatically stop the device operation
(turn off the power) when the vehicle’s battery
voltage falls below a set voltage value.
[11.6V]/
[11.8V]
/
[12.0V]/[12.2V]
System
Link GPS Date
time
Sets the time zone.*1
[GMT
−
12:00] to
[GMT+12:00]
[+00:00]
Date/Time
Sets the time manually.
―
System Sound
Volume
Sets beeps and playback volume. This can also
be set to OFF.
[OFF]/[1] to [5]
[3]
Mic Mute
Sets whether or not to record sound around this
product during video recording.
[ON]
/[OFF]
SD Card Partition Changes the SD card partition.
[74%
15% 10% 1%]/
[54% 15% 30% 1%]
Button Sound
Sets whether or not to sound beeps.
[ON]
/[OFF]
Monitor Display
Setting*2
Sets the time that the products enter the sleep
mode.
When the settings menu is displayed, the
product does not enter the sleep mode
regardless of how this item is set.
[Always On]
/
[Screen off in 10 secs.]/
[Screen off in 1 min.]/
[Screen off in 3 min.]
Language
Sets the language used to display the screen.
[English]
/
[Français]/
[Español]/
[Deutsch]/
[
Pусский
]/
[Jezyk polski]
Format SD Card All files on the microSD card can be deleted.
*
3
―
Restore to Factory
Mode
Settings can be reset to the default settings.
―
Version
Allows you to check the version information of
this product firmware.
―
*
1 If this setting is changed, the change will apply at the moment after the vehicle engine is turned off
(ACC OFF) and then on again (ACC ON).
*
2 When Parking Mode or Security Mode is activated, LCD Standby turns off after ten seconds
regardless of this setting.
*
3 When there is some problem with the microSD card, a warning tone sounds and an alarm
message, such as “No SD card” is displayed, and recording stops.