−
38
−
English
Configurable Features
Values
Bold:
The factory default setting.
Setting
Category
Setting
Details
Set value
Video
Recording
Video Clip Length Sets the recording time for one video recording
video file in video recording.
[
1 min
]/
[3 min]
/
[
5 min
]
Video Resolution Sets the image quality of video recording.*1
[1280 x 720p]/
[1920×1080p]
WDR
(
Wide Dynamic
Range
)
Sets use of the feature that automatically
adjusts the image in situations where there is a
large difference between light and dark.
[ON]
/[OFF]
Exposure
Compensation
Sets the exposure of video recording.
[
−
1.0]/[
−
0.7]/
[
−
0.3]/
[0]
/[+0.3]/
[+0.7]/[+1.0]
G-Sensor
Sensitivity
Sets the sensitivity for detecting vibration or
impact. If you set a high value, the sensitivity
will increase.
[1] to [6]
[4]
Sudden Brake
Detection Setting
Sets the sensitivity for detecting sudden
braking.
[High]
/[Low]/
[OFF]
Calibration
Sets the adjustment of the shooting range
evenly up/down/left/right for the images of the
separately sold 2nd camera.*3
→
“Correcting the Errors in the Shooting
Range for Detection of an Approaching
Vehicle Behind”
Center
Unit of
measurement
Toggles [cm] and [inch] unit settings.
[cm]
/[inch]
Mounting Height
Setting
Sets the height from the ground to the lens on
the 2nd camera (sold separately).*3
[cm]
:
[50 cm] to [200 cm]
[150 cm]
[inch]:
[20.0 inch] to
[78.5 inch]
[60.0 inch]
Tailgating
Sensitivity Setting
Sets the sensitivity of detection of approaching
vehicles behind.
[High]/
[Low]
/
[OFF]
*
1 Only the video resolution of the main camera can be set. The video resolution of the 2nd camera
(sold separately) cannot be set.
*
2 Only displayed when a 2nd camera (sold separately) is connected.
*
3 Set this properly for correct detection of an approaching vehicle behind.
*2