manualshive.com logo in svg

Pioneer VSX-1130-K, Operating Instructions Manual

The Pioneer VSX-1130-K is a high-quality audio/video receiver designed to enhance your home entertainment experience. With its advanced features and immersive sound quality, this user-friendly product is perfect for both beginners and seasoned audio enthusiasts. To get started quickly, simply download the free Quick Start Manual from our website.

Share
Download
background image

133

Additional information

15

Specifications

Amplifier section (VSX-1130)

Continuous average power output of 100 watts* per channel, min., at 8 ohms, from 20 Hz to 20 000 Hz 
with no more than 0.08 %** total harmonic distortion.

Front (stereo) ...................................................................................................................................... 100 W + 100 W

Power output (1 kHz, 6 

W

, 1 %, 1 ch driven) ............................................................................................................165 W

Guaranteed speaker impedance ..................................................................................................................... 6 

W

 to 16 

W

* Measured pursuant to the Federal Trade Commission’s Trade Regulation rule on Power Output Claims for 

Amplifiers

** Measured by Audio Spectrum Analyzer

Amplifier section (VSX-830)

Continuous average power output of 80 watts* per channel, min., at 8 ohms, from 20 Hz to 20 000 Hz 
with no more than 0.08 %** total harmonic distortion.

Front (stereo) .......................................................................................................................................... 80 W + 80 W

Power output (1 kHz, 6 

W

, 1 %, 1 ch driven) ............................................................................................................140 W

Guaranteed speaker impedance ..................................................................................................................... 6 

W

 to 16 

W

* Measured pursuant to the Federal Trade Commission’s Trade Regulation rule on Power Output Claims for 

Amplifiers

** Measured by Audio Spectrum Analyzer

Audio Section

Input (Sensitivity/Impedance)

LINE .......................................................................................................................................................315 mV/47 k

W

Signal-to-Noise Ratio (IHF, short circuited, A network)

LINE ................................................................................................................. 101 dB (VSX-1130)/100 dB (VSX-830)

Tuner Section

Frequency Range (FM) ....................................................................................................................87.5 MHz to 108 MHz
Antenna Input (FM) ................................................................................................................................ 75 

W

 unbalanced

Frequency Range (AM) .....................................................................................................................530 kHz to 1 700 kHz
Antenna (AM) ............................................................................................................................ Loop antenna (balanced)

Video Section

Signal level

Composite Video .................................................................................................................................... 1 Vp-p (75 

W

)

Component Video (VSX-1130 only) ......................................................... Y: 1.0 Vp-p (75 

W

), PB/PR: 0.7 Vp-p (75 

W

)

Corresponding maximum resolution

Component Video (VSX-1130 only) ......................................................................................................1080p (1125p)

Bluetooth Section

Version ................................................................................................................

Bluetooth

 Specification Ver. 2.1 + EDR

Output ..............................................................................................................................

Bluetooth

 Specification Class 2

Estimated line-of-sight transmission distance* ............................................................................................About 10 m
*The line-of-sight transmission distance is an estimate. Actual transmission distances supported may differ 
depending on surrounding conditions.
Frequency range .................................................................................................................................................... 2.4 GHz
Supported 

Bluetooth

 profiles ..................................................................................................................... A2DP, AVRCP

Supported Codec .................................................................................................................SBC (Subband Codec), AAC

Digital In/Out Section

HDMI terminal ......................................................................................................................................... 19-pin (Not DVI)
HDMI output type .............................................................................................................................................. 5 V, 55 mA
HDMI input/MHL terminal ............................................................................................................................. 5 V, 900 mA
USB terminal ..........................................................................................................USB2.0 High Speed (Type A) 5 V, 1 A
iPod terminal ............................................................................................................................................................... USB

Integrated Control Section (VSX-1130 only)

Control (IR) terminal ....................................................................................................................ø 3.5 Mini-jack (MONO)
IR signal .............................................................................................................................High Active (High Level: 2.0 V)

Network Section (Wired)

LAN terminal ...............................................................................................................................10 BASE-T/100 BASE-TX

Network Section (Wireless)

WLAN standards .................................................................... IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Frequency band

2.4 GHz band (2.412 GHz to 2.462 GHz) .............................................................................Channel 1 to Channel 11
5 GHz band (5.180 GHz to 5.240 GHz, 5.745 GHz to 5.825 GHz) ..........Channel 36 to Channel 48, Channel 149 to 

Channel 165

Security .......................................................................................................................................Disabled (no encryption)

WEP (Key length: 64 bit/128 bit, Key format: ASCII/Hex)

WPA2 Mixed (WPA/WPA2, Encryption method: TKIP/AES, Recognition method: PSK)

Miscellaneous

Power requirements .................................................................................................................................AC 120 V, 60 Hz
Power consumption ..................................................................................................550 W (VSX-1130)/450 W (VSX-830)

In standby ............................................................................................................................................................0.1 W
In standby (HDMI control on) ............................................................................................................................0.3 W
In standby (Network standby on) .......................................................................................................................2.7 W
In standby (Network standby on, wireless LAN connected) ............................................................................3.0 W
In standby (HDMI control on, Network standby on) .........................................................................................2.7 W
In standby (HDMI control on, Network standby on, wireless LAN connected) ..............................................3.0 W

Auto power down .....................................................................................................15 min, 30 min, 60 min, off (default)
Dimensions

VSX-1130 .................................................................................................... 435 mm (W) x 168 mm (H) x 363 mm (D)

(17 3/16 in. (W) x 6 5/8 in. (H) x 14 5/16 in. (D))

VSX-830 ................................................................................................... 435 mm (W) x 168 mm (H) x 331.5 mm (D)

(17 3/16 in. (W) x 6 5/8 in. (H) x 13 1/16 in. (D))

Weight (without package)

VSX-1130 ........................................................................................................................................ 9.8 kg (21 lb 10 oz)
VSX-830 ............................................................................................................................................ 8.7 kg (19 lb 3 oz)

Number of Furnished Parts

MCACC Setup microphone .............................................................................................................................................. 1
Remote control unit .......................................................................................................................................................... 1
AAA size IEC R03 dry cell batteries .................................................................................................................................. 2
AM loop antenna ............................................................................................................................................................... 1
FM wire antenna ............................................................................................................................................................... 1
CD-ROM
Quick start guide
Safety Brochure
Warranty sheet

  Notes

!

  Specifications and the design are subject to possible modifications without notice, due to improvements.

!

 

This product includes FontAvenue

®

 fonts licensed by NEC Corporation. FontAvenue is a registered trademark of 

NEC Corporation.

!

 

iOS is a trademark on which Cisco holds the trademark right in the US and certain other countries.

!

 

Microsoft, Windows, Windows Media and Windows Vista are either registered trademarks or trademarks of 
Microsoft Corporation in the United States and/or other countries.

!

 

Android and Google Play are trademarks of Google Inc.

!

  Corporation and product names mentioned herein are trademarks or registered trademarks of the respective 

corporations.

　
　

　

　

Summary of Contents for VSX-1130-K

































































































































































Reviews:

No comments

Related manuals for VSX-1130-K

Javad TRIUMPH-3 Start Manual preview
TRIUMPH-3
Brand: Javad Pages: 16
JBL Performance AV1 User Manual preview
Performance AV1
Brand: JBL Pages: 160
LaserLiner SensoPilot Pro Operating Instructions Manual preview
SensoPilot Pro
Brand: LaserLiner Pages: 40
LabSat 3 Wideband Quick Start Manual preview
3 Wideband
Brand: LabSat Pages: 2
Ramsey Electronics HR20 User Manual preview
HR20
Brand: Ramsey Electronics Pages: 28
Blaupunkt New Jersey MP68 Operating And Installation Instructions preview
New Jersey MP68
Brand: Blaupunkt Pages: 400
E Star T2 516 HD USB PVR Short User Manual preview
T2 516 HD USB PVR
Brand: E Star Pages: 36
B&K AVR212 Owner'S Manual preview
AVR212
Brand: B&K Pages: 88
Marantz M-CR511 Owner'S Manual preview
M-CR511
Brand: Marantz Pages: 133
Pro2 MD 41133 Instruction Manual preview
MD 41133
Brand: Pro2 Pages: 24
CallingSYS ZJ-82 User Manual preview
ZJ-82
Brand: CallingSYS Pages: 8
Convex CX-D2800GP User Manual preview
CX-D2800GP
Brand: Convex Pages: 36
HITEC MINIMA 6S Instruction preview
MINIMA 6S
Brand: HITEC Pages: 2
Xtrend ET4000 Manual preview
ET4000
Brand: Xtrend Pages: 6
Sennheiser EK 500 G2 Instructions For Use Manual preview
EK 500 G2
Brand: Sennheiser Pages: 32
JVC KD-DV7305 Installation Manual preview
KD-DV7305
Brand: JVC Pages: 6
HP EN5000 User Manual preview
EN5000
Brand: HP Pages: 68
HP 83447A User'S And Service Manual preview
83447A
Brand: HP Pages: 102

Brands by name

Popular brands

Load more brands