3
English
Français
Italiano
Español
Nederlands
Deutsch
Connecting a TV and playback
components
Note
•
Refer to the operating instructions in the included CD-
ROM if you wish to connect a TV or playback component
in a method other than an HDMI connection.
•
Refer to the operating instructions in the included CD-
ROM for other device connections.
CAUTION
•
Handle the power cord by the plug part. Do not pull out
the plug by tugging the cord, and never touch the power
cord when your hands are wet, as this could cause a short
circuit or electric shock. Do not place the unit, a piece of
furniture, or other object on the power cord or pinch the
cord in any other way. Never make a knot in the cord or tie
it with other cables. The power cords should be routed so
that they are not likely to be stepped on. A damaged power
cord can cause a fire or give you an electric shock. Check
the power cord once in a while. If you find it damaged,
ask your nearest Pioneer authorized independent service
company for a replacement.
VENTILATION CAUTION
When installing this unit, make sure to leave space around the
unit for ventilation to improve heat radiation (at least 40 cm at
top, 20 cm at rear, and 20 cm at each side).
WARNING
Slots and openings in the cabinet are provided for ventilation
to ensure reliable operation of the product, and to protect it
from overheating. To prevent fire hazard, the openings should
never be blocked or covered with items (such as newspapers,
table-cloths, curtains) or by operating the equipment on thick
carpet or a bed.
D3-4-2-1-7b*_A1_En
Connecting up (continued)
Connecting antennas
2
1
AM loop antenna
FM wire antenna
VSX-824
Connecting to the network through
LAN interface
VSX-824/VSX-529 only
WAN
3
2
1
LAN
LAN cable (sold separately)
Router
Modem
Computer
Internet
HDMI IN
HDMI OUT
DIGITAL AUDIO OUT
OPTICAL
B
VIDEO IN
A
HDMI/DVI-compatible TV
VSX-824
•
VSX-424/VSX-329 only:
Composite video cable (
A
)
connection is necessary in order to see the OSD of the
unit on the TV.
•
VSX-824/VSX-529 only:
The OSD will only be output from the
HDMI OUT terminal.
•
If the TV does not support the HDMI Audio Return Channel
function, optical digital cable (
B
) connection is required to
listen to the TV sound over the receiver.
•
If the TV supports the HDMI Audio Return Channel
function, the sound of the TV is input to the receiver via the
HDMI terminal, so there is no need to connect an
optical
digital cable
(
B
). In this case, set
ARC
at
HDMI Setup
to
ON
l
“The HDMI Setup menu” on page 36
(VSX-424/VSX-
329)
,
“HDMI Setup”
on page 56
(VSX-824/VSX-529)
.
•
Please refer to the TV’s operation manual for directions on
connections and setup for the TV.
VSX-824
HDMI/DVI-compatible
Blu-ray Disc player, etc.
Summary of Contents for VSX-329-K
Page 45: ...9 English Français Italiano Español Nederlands Deutsch ...
Page 46: ...10 ...
