background image

Additional information

7

7

37

2

33

4

Software license notice

The licenses for the open source software used on this 
product are shown below. For accuracy purposes, here we 
have included the original texts (in English). 

FreeRTOS V6.0.5

Copyright (C) 2009 Real Time Engineers Ltd.

The FreeRTOS.org source code is licensed by the modified GNU 

General Public License (GPL) text provided below.

An exception to this license exists that can be applied should you wish 

to use FreeRTOS in a work that includes commercial or proprietary code 

without being obliged to provide source code for the proprietary 

components. See the licensing section of

http://www.FreeRTOS.org for full details.

GNU GENERAL PUBLIC LICENSE

Version 2, June 1991

Copyright (C) 1989, 1991 Free Software Foundation, Inc., 51 Franklin 

Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted 

to copy and distribute verbatim copies of this license document, but 

changing it is not allowed.

Preamble

The licenses for most software are designed to take away your freedom 

to share and change it. By contrast, the GNU General Public License is 

intended to guarantee your freedom to share and change free software-

-to make sure the software is free for all its users. This General Public 

License applies to most of the Free Software Foundation's software and 

to any other program whose authors commit to using it. (Some other 

Free Software Foundation software is covered by the GNU Lesser 

General Public License instead.) You can apply it to your programs, too.

When we speak of free software, we are referring to freedom, not price. 

Our General Public Licenses are designed to make sure that you have 

the freedom to distribute copies of free software (and charge for this 

service if you wish), that you receive source code or can get it if you want 

it, that you can change the software or use pieces of it in new free 

programs; and that you know you can do these things.

To protect your rights, we need to make restrictions that forbid anyone 

to deny you these rights or to ask you to surrender the rights. These 

restrictions translate to certain responsibilities for you if you distribute 

copies of the software, or if you modify it.

For example, if you distribute copies of such a program, whether gratis 

or for a fee, you must give the recipients all the rights that you have. You 

must make sure that they, too, receive or can get the source code. And 

you must show them these terms so they know their rights.

We protect your rights with two steps: (1) copyright the software, and (2) 

offer you this license which gives you legal permission to copy, distribute 

and/or modify the software.

Also, for each author's protection and ours, we want to make certain that 

everyone understands that there is no warranty for this free software. If 

the software is modified by someone else and passed on, we want its 

recipients to know that what they have is not the original, so that any 

problems introduced by others will not reflect on the original authors' 

reputations.

Finally, any free program is threatened constantly by software patents. 

We wish to avoid the danger that redistributors of a free program will 

individually obtain patent licenses, in effect making the program 

proprietary. To prevent this, we have made it clear that any patent must 

be licensed for everyone's free use or not licensed at all.

The precise terms and conditions for copying, distribution and 

modification follow.

GNU GENERAL PUBLIC LICENSE

TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND 

MODIFICATION

0. This License applies to any program or other work which contains a 

notice placed by the copyright holder saying it may be distributed 

under the terms of this General Public License. The "Program", 

below, refers to any such program or work, and a "work based on the 

Program" means either the Program or any derivative work under 

copyright law: that is to say, a work containing the Program or a 

portion of it, either verbatim or with modifications and/or translated 

into another language. (Hereinafter, translation is included without 

limitation in the term "modification".) Each licensee is addressed as 

"you".

Activities other than copying, distribution and modification are not 

covered by this License; they are outside its scope. The act of 

running the Program is not restricted, and the output from the 

Program is covered only if its contents constitute a work based on 

the Program (independent of having been made by running the 

Program). Whether that is true depends on what the Program does.

1. You may copy and distribute verbatim copies of the Program's 

source code as you receive it, in any medium, provided that you 

conspicuously and appropriately publish on each copy an 

appropriate copyright notice and disclaimer of warranty; keep intact 

all the notices that refer to this License and to the absence of any 

warranty; and give any other recipients of the Program a copy of this 

License along with the Program.

You may charge a fee for the physical act of transferring a copy, and 

you may at your option offer warranty protection in exchange for a fee.

2. You may modify your copy or copies of the Program or any portion 

of it, thus forming a work based on the Program, and copy and 

distribute such modifications or work under the terms of Section 1 

above, provided that you also meet all of these conditions:

a) You must cause the modified files to carry prominent notices 

stating that you changed the files and the date of any change.

b) You must cause any work that you distribute or publish, that in 

whole or in part contains or is derived from the Program or any 

part thereof, to be licensed as a whole at no charge to all third 

parties under the terms of this License.

c) If the modified program normally reads commands interactively 

when run, you must cause it, when started running for such 

interactive use in the most ordinary way, to print or display an 

announcement including an appropriate copyright notice and a 

notice that there is no warranty (or else, saying that you provide 

a warranty) and that users may redistribute the program under 

these conditions, and telling the user how to view a copy of this 

License. (Exception: if the Program itself is interactive but does 

not normally print such an announcement, your work based on 

the Program is not required to print an announcement.)

These requirements apply to the modified work as a whole. If identifiable 

sections of that work are not derived from the Program, and can be 

reasonably considered independent and separate works in themselves, 

then this License, and its terms, do not apply to those sections when you 

distribute them as separate works. But when you distribute the same 

sections as part of a whole which is a work based on the Program, the 

distribution of the whole must be on the terms of this License, whose 

permissions for other licensees extend to the entire whole, and thus to 

each and every part regardless of who wrote it.

Thus, it is not the intent of this section to claim rights or contest your 

rights to work written entirely by you; rather, the intent is to exercise the 

right to control the distribution of derivative or collective works based on 

the Program.

In addition, mere aggregation of another work not based on the Program 

with the Program (or with a work based on the Program) on a volume of 

a storage or distribution medium does not bring the other work under the 

scope of this License.

3. You may copy and distribute the Program (or a work based on it, 

under Section 2) in object code or executable form under the terms 

of Sections 1 and 2 above provided that you also do one of the 

following:

a) Accompany it with the complete corresponding machine-

readable source code, which must be distributed under the terms 

of Sections 1 and 2 above on a medium customarily used for 

software interchange; or,

b) Accompany it with a written offer, valid for at least three years, to 

give any third party, for a charge no more than your cost of 

physically performing source distribution, a complete machine-

readable copy of the corresponding source code, to be 

distributed under the terms of Sections 1 and 2 above on a 

medium customarily used for software interchange; or,

c)  Accompany it with the information you received as to the offer to 

distribute corresponding source code. (This alternative is 

allowed only for noncommercial distribution and only if you 

received the program in object code or executable form with such 

an offer, in accord with Subsection b above.)

The source code for a work means the preferred form of the work for 

making modifications to it. For an executable work, complete source 

code means all the source code for all modules it contains, plus any 

associated interface definition files, plus the scripts used to control 

compilation and installation of the executable. However, as a special 

exception, the source code distributed need not include anything that is 

normally distributed (in either source or binary form) with the major 

components (compiler, kernel, and so on) of the operating system on 

which the executable runs, unless that component itself accompanies 

the executable.

If distribution of executable or object code is made by offering access to 

copy from a designated place, then offering equivalent access to copy 

the source code from the same place counts as distribution of the 

source code, even though third parties are not compelled to copy the 

source along with the object code.

4. You may not copy, modify, sublicense, or distribute the Program 

except as expressly provided under this License. Any attempt 

otherwise to copy, modify, sublicense or distribute the Program is 

void, and will automatically terminate your rights under this License.

VSX-532_CDC_En.book  37 ページ  2017年1月12日 木曜日 午後3時12分

Summary of Contents for VSX-532








































Reviews: