Basic playback
4
4
23
•
Stations are stored in stereo. When the station is stored in
the FM MONO mode, it shows as
ST
when recalled.
Listening to station presets
You will need to have some presets stored to do this. See
already.
…
Press
/–
to select the station preset you
want.
Naming preset stations
For easier identification, you can name all of your preset
stations.
1
Choose the station preset you want to name.
2
Press
EDIT
twice.
The cursor at the first character position is blinking on
the display.
3
Input the name you want.
Choose a name up to eight characters long.
•
Use
/–
to select character position.
•
Use
TUNE +/–
to select characters.
•
The name is stored when
ENTER
is pressed.
Tip
•
To erase a station name, follow steps 1 and 2, and press
ENTER
while the display is blank. Press
EDIT
while the
display is blank, to keep the previous name.
•
Once you have named a station preset, Press
DISP
to
show the name. When you want to return to the frequency
display, press
DISP
several times to show the frequency.
VSX-532_CDC_En.book 23 ページ ２０１７年１月１２日 木曜日 午後３時１２分
