58
VSX-709RDS, VSX-609RDS
dB
PRO LOGIC
DIGITAL
DSP
ATT
SIGNAL
SELECT
MIDNIGHT
LOUDNESS
DIRECT
S.BASS
MONITOR
EON
RDS
RF ATT
TUNED
MONO
ANALOG
DIGITAL
DIGITAL
DTS
SP AB STEREO
Display
^
PHONES jack
Use to connect headphones but this does not switch the
speakers off.
&
EON MODE button
Use to search for different programs that are transmitting
traffic or news information (this search method is called
EON).
*
SPEAKERS button
Use to switch the speaker system A
=
B
=
A+B
=
off.
(
Function buttons
Use to select a source for playback or recording.
)
MONITOR button
Press to switch tape monitoring on/off.
_
VIDEO INPUT jacks (VSX-709RDS only)
Connect a video camera, video game system, etc. to the
VIDEO INPUT jacks.
1
indicator
Lights when DTS mode is being used.
2
2
PRO LOGIC indicator
When the
2
(Dolby)/DTS mode of the receiver is on, this
lights to indicate playback of a two channel source.
3
DSP indicator
Lights when any Advanced Theater or DSP mode is
selected.
4
MIDNIGHT indicator
Lights when Midnight listening mode is in use.
5
DIRECT indicator
Lights when Direct playback is ON. This function bypasses
all tone, balance, DSP and Dolby Surround effects.
6
MONITOR indicator
Lights when MONITOR is selected to hear a recording as
it’s being made.
The box around EON indicator lights to inform you that the
currently tuned station carries the EON data service.
When the EON mode is set, the EON indicator ligh†s, but
during actual reception of an EON broadcast the EON
indicator will flash. An empty box in the EON indicator spot
means it is possible to pick up an EON broadcast but the
receiver has not been set to do so (this will only appear
when RDS is switched on).
9
RDS indicator
Lights when an RDS broadcast is received.
0
RF ATT indicator
Lights when the RF ATT is on.
-
SIGNAL SELECT indicators
Light to indicate the type of input signal assigned for the
current component (see “Front Panel“,
$
, SIGNAL
SELECT).
ANALOG : Lights when an analog signal is selected.
DIGITAL : Lights when a digital audio signal is selected.
2
DIGITAL : Lights when a Dolby Digital signal is played.
DTS: Lights when a source with DTS audio signals is
played.
=
2
DIGITAL indicator
When the
2
(Dolby)/DTS mode of the receiver is on, this
lights to indicate playback of a Dolby Digital signal. However
2
PRO LOGIC lights during 2 channel playback of Dolby
Digital.
~
Character display
Shows the radio frequency or function (DVD/LD, CD, etc.)
receiver is using .
!
÷
(Overload) indicator
This lights when an analog signal is too strong (the SIGNAL
SELECT needs to be on ANALOG). It indicates the sound is
distorting and the signal should be reduced.
@
ATT indicator
Lights when ATT is used to attenuate (reduce) the level of
the input signal (can only be used in ANALOG mode).
#
LOUDNESS indicator
Lights when the LOUDNESS, used to boost the bass and
treble in quiet listening, is on.
$
SP
3
AB (Speakers) indicator
Shows if the speaker system is on or not. SP
3
A and/or B
means speakers are switched on. SP
3
means speakers
are switched off.
%
Master volume level display
Shows the overall volume level. Volume level is maintained
even when the power is off. – – – dB indicates the minimum
level, and 0 dB indicates the maximum level.
• Depending on the level settings you make for
individual channels, the MAX level can range between
–10 dB and 0 dB.
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
