15
English
Français
Deutsch
Italiano
Nederlands
Español
Português
Using Auxiliary Input
Setting The Alarm
Set the alarm time under STANDBY mode (Turn the power off)
1. Press and hold
FUNC (on either system or remote control) to enter alarm setting
mode.
2. The “Minute” of the alarm time on the display starts to blink.
[System] Press
/
Volume – to adjust the time.
[Remote] Press
Up/
Down to adjust the time.
3. Press
FUNC again to adjust “Hour”.
[System] Press
/
Volume – to adjust the time.
[Remote] Press
Up/
Down to adjust the time.
4. The display will show “END” when alarm time set is complete.
Switching Alarm Mode
[Remote] Press
Alarm Mode to switch between different alarm sounds: BUZZ (default
sound)
A
iPod
A
FM
A
Alarm off sound
[System] When the system is in STANDBY mode, press and hold
Power to switch
between different alarm sounds: BUZZ (default sound)
A
iPod
A
FM
A
Alarm off sound
When Alarm Sounds
1. Press
SNOOZE on the remote, the alarm will stop and re-sound every
10 minutes.
2. Press
POWER to turn off the alarm.
Setting The Clock
Set the clock time under STANDBY mode. (Turn the power off)
1. After the alarm time set is complete, press
FUNC to enter clock time set.
2. The “Minute” of the clock time on the display starts to blink.
[System] Press
/
Volume – to adjust the time.
[Remote] Press
Up/
Down to adjust the time.
3. Press
FUNC again to adjust “Hour”.
[System] Press
/
Volume – to adjust the time.
[Remote] Press
Up/
Down to adjust the time.
4. The display will show “END” when clock time set is complete.
Using Alarm