27
En
7
Making tape recordings
English
7
TAPE
ENTER
REC
MENU
PLAY
MODE
Automatically recording
from a CD
This feature makes recording a CD as
simple as possible by automatically
starting and stopping the disc and tape
together. You can choose to record the
whole disc or a set playlist of your
choice.
1 Press TAPE (
2 3
) then load a
cassette into the tape deck.
In order to follow these instructions
more easily, load the cassette with
side A face-up.
2 Check the recording direc-
tion.
If you start recording in the
3
directon, both sides of the tape will be
recorded (unless the erase protect tab
for side B is missing). If you switch
sides and start recording in the
2
direction, then recording will start from
side B and stop when the end of the
tape is reached.
If you need to change the direction,
press
TAPE
(
2 3
) twice, then
7
.
3 Set the reverse mode (p. 17)
•
– Record one side only
•
or
– Record both sides if
recording starts in the
3
(forward)
direction, or one side when it starts in
the
2
(reverse) direction
4 Load the disc you want to
record.
Press
7
to make sure the disc is
stopped.
Tr12 t55:57
The CD display showing a disc with 12
tracks and a total playing time of
55:57.
5 If you want to record a
programmed playlist, enter
the track order here.
See
Programming the track order
on
page 18 for more on how to do this.
Playback must be stopped before going
to the next step.
6
Press REC MENU and choose
SYNCHRO REC using the
5
and
∞
buttons.
Press
7
anytime to cancel and exit the
menu.
7 Press ENTER
Recording starts automatically after
pressing
ENTER
.
TrO1 O:O2
Once recording starts, the
REC
indicator remains lit.
Should you want to stop recording
before the track/disc has finished
playing, simply press
7
any time
during the recording
If a track is interrupted when the tape
switches sides, the same track will be
recorded again in its entirety from the
beginning of the next side.
Summary of Contents for X-NM1
Page 1: ......
Page 78: ...40 Fr Additional Information 9 ...
