Additional information
11
33
En
English
Français
Español
When an iPod/iPhone/iPad mini is connected
Power is not supplied to the
USB storage device.
Is
AUTH ERR
displayed on the front
panel display? No power is supplied if
the power consumption is too high.
Turn the power off then back on.
Turn the power off, then disconnect and reconnect the USB storage
device.
Press
INPUT
to switch to the other mode, then switch again to the
USB mode.
Problem
Check
Remedy
Problem
Remedy
Can’t operate the iPod/iPhone/iPad mini by the remote control.
Make sure the iPod/iPhone/iPad mini is connected correctly (refer
to
Connecting your iPod/iPhone
on page 16).
Can’t operate the iPod/iPhone/iPad mini.
Make sure the iPod/iPhone/iPad mini is connected correctly (refer
to
Connecting your iPod/iPhone
on page 16).
If the iPod/iPhone/iPad mini is experiencing a hangup, try resetting
the iPod/iPhone/iPad mini, and reconnect it to the unit.