Pioneer X-SMC01-K Operating Instructions Manual Download

Page: 27 / 39

Bluetooth

® Audio playback

Chapter 10:

Bluetooth

Audio playback

(X-SMC01BT only)

Music playback using

Bluetooth

wireless

technology

The unit is capable of playing back music stored on

Bluetooth

capable devices (cell phones, digital music players etc.)

wirelessly. You can also use a

Bluetooth

audio transmitter

(sold separately) to enjoy music from devices that do not have

Bluetooth

functionality. Please refer to the user’s manual for

your

Bluetooth

capable device for more details.

Note

• The

Bluetooth

word mark and logos are registered

trademarks owned by Bluetooth SIG, Inc. and any use of

such marks by PIONEER CORPORATION is under

license. Other trademarks and trade names are those of

their respective owners.

• The

Bluetooth

wireless technology enabled device must

support A2DP profiles.

• Pioneer does not guarantee proper connection and

operation of this unit with all

Bluetooth

wireless

technology enabled devices.

Remote control operation

The remote control supplied with this unit allows you to play

and stop media, and perform other operations.

Note

• The

Bluetooth

wireless technology enabled device must

support AVRCP profiles.

• Remote control operations cannot be guaranteed for all

Bluetooth

wireless technology enabled devices.

Pairing with the unit (Initial registration)

In order for the unit to playback music stored on a

Bluetooth

capable device, pairing must first be performed. Pairing

should be performed when first using the unit with the

Bluetooth

capable device, or when the pairing data on the

device has been erased for any reason.
Pairing is a step required to allow communication using

Bluetooth

wireless technology to be carried out.

• Pairing is only performed the first time that you use the

unit and the

Bluetooth

capable device together.

• In order to allow communication using

Bluetooth

wireless technology to take place, pairing must be

performed on both the unit and the

Bluetooth

capable

device.

• After pressing the

BT AUDIO

and switching to

AUDIO

input, perform the pairing procedure on the

Bluetooth

capable device. If pairing has been performed

correctly, you will not need to perform the pairing

procedures for the unit as shown below.

Please refer to the user’s manual for your

Bluetooth

capable

device for more details.

Press the



STANDBY/ON and turn the

power to the unit on.

Press the BT AUDIO.

The unit switches to

BT AUDIO

and

PAIRING

will be

displayed.

Turn on the power to the

Bluetooth

capable

device that you wish to pair with, and perform
pairing procedure on it.

Note

• This unit will be displayed as “X-SMC01” on all Bluetooth

capable devices that you have.

Pairing will start.

• Place the

Bluetooth

capable device close to the unit.

AUDIO IN

POWER ON

TIMER

Bluetooth

wireless technology

enabled device:

Cell phone

Bluetooth

wireless technology

enabled device:

Digital music player

Device not equipped with

Bluetooth

wireless technology:

Digital music player

Bluetooth

audio transmitter

(commercially available)

Music data

Summary of Contents for X-SMC01-K








































Search results

Summary of Contents for X-SMC01-K

Reviews:

Related manuals for X-SMC01-K

Brands by name

Popular brands

Pioneer X-SMC01-K, Operating Instructions Manual

Search results

Summary of Contents for X-SMC01-K

Reviews:

Related manuals for X-SMC01-K

Brands by name

Popular brands