English
Français
Deutsch
Nederlands
Italiano
Español
3
En
ANTENNA
Connecting the speakers
CAUTION
•
These speaker terminals carry
HAZARDOUS LIVE
voltage. To prevent
the risk of electric shock when connecting
or disconnecting the speaker cables,
disconnect the power cord before touching
any uninsulated parts.
•
Make sure that all the bare speaker wire
is twisted together and inserted fully into
the speaker terminal. If any of the bare
speaker wire touches the back panel it
may cause the power to cut off as a safety
measure.
Be sure to complete all connections before connecting the unit to the AC power source.
Connecting playback components
Right speaker
Left speaker
Make sure you connect the speaker on the
right to the right (R) terminal and the speaker
on the left to the left (L) terminal. Also make
sure the positive and negative (+/–) terminals
on the stereo receiver match those on the
speakers.
You can use speakers with a nominal
impedance between 4
W
and 16
W
.
Stereo receiver (XC-P01 for example)
Remote control cable
To CD IN sockets
To REMOTE CONTROL
OUT socket
To REMOTE CONTROL
IN socket
To AUDIO OUT sockets
CD player
Stereo receiver (XC-P01 for example)
Connecting aerials
Connect your iPod/iPhone/iPad mini or USB device to the iPod/
iPhone/iPad mini/USB terminal on the front panel of the CD player.
USB cable provided with iPod/iPhone/iPad mini
units, or a commercially available USB cable to
support iPod/iPhone/iPad mini (for iPod connection)
Connecting your iPod/iPhone/iPad mini or USB
device
FM aerial
iPod/iPhone/iPad mini
Connect the FM aerial wire (XC-P01) or DAB/FM aerial wire (XC-
P01DAB) as shown below.
USB mass
storage
device
XC-P01DAB:
Connect the DAB/FM aerial
to the DAB/FM socket.
Connect the stereo receiver and CD player with the supplied remote control cable and RCA audio cable.
ANTENNA
XC_P01_P01DAB_QSG.indb 3
2012/12/21 13:32:43
Summary of Contents for XC-P01-S-K
Page 30: ...6 Ru ...
