En
5
English
Installation and Connections
How to Install
The playback sound of the speaker is subtly influenced by the conditions of the
listening room. Carefully consider the installation location before installing
the speaker so that it can be used in the best conditions. Pioneer DJ will not
be liable for any damages arising from the use of the speaker (including but
not limited to loss of business opportunities), regardless of the installation
method.
Use the handles on the top or the sides of the speaker when moving and
installing the speaker.
Installation Using a Speaker Pole
XPRS12/XPRS15
The full-range models of the XPRS series have a 35-mm-diameter multi-angle
pole socket on the bottom surface and can be installed downward at an angle
of 0° or 7° to the floor surface.
The subwoofer model of the XPRS series has an M20 screw-in pole socket on
the top surface and the pole can be secured firmly.
The combinations shown in the following figures are recommended for the
XPRS series. Use with a combination other than those may result in the
speakers toppling over, causing damage or injury. To use a speaker pole,
check the cautions on the right and perform the installation safely.
CAUTION
!
At least two persons should together lift the speaker to install. Give
sufficient consideration to safety when performing the work.
!
For the speaker pole, use a 35-mm-diameter, one-side M20 screw-in
speaker pole. Use a commercially-available product with a length
of 900 mm or less. Pioneer DJ will not be liable for any damages
(including but not limited to loss of business opportunities) arising
from the use of a speaker pole other than specified.
!
Install the subwoofer in a stable location and secure the speaker pole
firmly.
!
Ensure that there is no danger of toppling.
!
Cables should be taped or tied together with cable ties so as to avoid
the danger of tripping on the cables and toppling the speaker.
CAUTION
!
When standing or laying the XPRS115S, XPRS215S, take care that the
casters do not slip and cause an injury.
!
To promote proper cooling, please assure that sufficient space
is preserved between the speakers and nearby walls or other
components (minimum 30 cm or more above, behind, and to right
and left sides of each speaker). Leaving insufficient space between
the speaker and walls or other components may lead to rising interior
temperatures, leading to malfunction or damage.
Multi-angle pole socket
Installation using a speaker pole
0°
7°
Front
35-mm-diameter
pole socket
M20 screw-in
pole socket
7° 0°
Front
XPRS12, XPRS15
XPRS215S
