XV-HTD330
96
1
2
4
1
2
4
C
D
F
A
B
E
Error Name
No.
Causes
Check Item
Possibility of Trouble
Remarks
FOCUS ERROR (0 x 0
∗
)
Focus on error
0 x 01
Focus on could not be completed
Are not there a dirt or a scratch in
the Disc? Does LD become weak?
Does the lens move up and down?
1. Pickup
2. Driver
3. Front End IC
Focus off error
0 x 02
Focus off could not be completed
Unknown
Focus lost error
0 x 03
Focus servo is lost
Are not there a dirt or a scratch in
the Disc? Does LD become weak?
1. Pickup
Focus balance adjust error
0 x 04
AFB on could not be completed
Focus gain adjust error
0 x 05
Focus AGC could not be completed
Focus sweep error
0 x 06
Focus reflection error
0 x 07
Dimensions of S curve did not reach to the aim value Does LD become weak?
1. Pickup
FOCUS TIMEOUT (0 x 1
∗
)
Focus on timeout
0 x 11
Did timeout at focus on
Are not there a dirt or a scratch in
the Disc? Does LD become weak?
Does the lens move up and down?
1. Pickup
2. Driver
3. Front End IC
Focus off timeout
0 x 12
Did timeout at focus off
Focus lost timeout
0 x 13
Did timeout at focus backup
Focus balance adjust timeout
0 x 14
Did timeout at AFB
Focus gain adjust timeout
0 x 15
Did timeout at AGC
Focus sweep timeout
0 x 16
TRACKING ERROR (0 x 2
∗
)
Tracking on error
0 x 21
Tracking on could not be completed
1. Pickup
2. Driver
3. Front End IC
Tracking off error
0 x 22
Tracking off could not be completed
Tracking lost error
0 x 23
Tracking servo is lost
1. Pickup
Tracking balance adjust error
0 x 24
ATB could not be completed
1. Pickup
Tracking gain adjust error
0 x 25
AGC could not be completed
1. Pickup
Tracking jump error
0 x 26
Tracking jump could not be completed
TRACKING TIMEOUT (0 x 3
∗
)
Tracking on timeout
0 x 31
Did timeout at tracking on
Are not there a dirt or a scratch in
the Disc?
1. Pickup
2. Driver
3. Front End IC
Tracking off timeout
0 x 32
Did timeout at tracking off
Tracking lost timeout
0 x 33
Did timeout at tracking backup
Are not there a dirt or a scratch in
the Disc?
1. Pickup
Tracking balance adjust timeout
0 x 34
Did timeout at ATB
1. Pickup
Tracking gain adjust timeout
0 x 35
Did timeout at AGC
1. Pickup
Tracking jump timeout
0 x 36
Did timeout at tracking jump
STEPPING ERROR (0 x 4
∗
)
Stepping on could not be completed
1. Pickup
2. Driver
3. Front End IC
Stepping off could not be completed
Do move to inner and outer periphery
of the stepping in the test mode?
Do indicate "S-04" at the most inner
periphery of the stepping?
1. Stepping motor
2. Inside switch
3. Driver
1. Pickup
2. Driver
3. Front End IC
Stepping off timeout
0 x 52
Did timeout at stepping off
Stepping lost timeout
0 x 53
Did timeout at stepping backup
Stepping move timeout
0 x 54
Did timeout at stepping movement
Do move to inner and outer periphery
of the stepping in the test mode?
Do indicate "S-04" at the most inner
periphery of the stepping?
1. Stepping motor
2. Inside switch
3. Driver
Error Code Table
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
