XV-HTD330
110
1
2
4
1
2
4
C
D
F
A
B
E
7.1.10 POWER ON SEQUENCE
Reset Start
Demonstration mode ?
Yes : Power ON
Yes
No
No
Microcomputer
initialization
Model
identification
Standby setting
• It starts when the XRESET terminal (Pin 8) is "H" level.
• The inputs to Pins 15 and 16 are inspected and the model identification is performed.
Demonstration mode
permission
Demonstration mode
System power supply on
DVD microcomputer start-up
Demonstration mode
or Normal power ON mode
• The level of the POWER terminal (Pin 93) is "H".
• Only in DVD function, the level of the DVD RESET terminal (Pin 93) is "H".
via the Headphones jack, or on the DPS mode.
• If no pulse is input to the AC terminal (Pin 4) for about 60 msec when the microcomputer is in Memory Backup mode,
it will not do any processing.
• The unit will recover from Memory Backup mode if a reset command is input to the XRESET terminal (Pin 8).
• The system mute is released about four seconds after the power is turned on.
The level of the SYSMUTE terminal (Pin 94) is "H".
• Muting is not released in the following cases.
• When the main volume is 0.
• When the digital LEVEL 2 function input signal is not locked,
or when the DSP MUTE terminal (Pin 87) is in error.
• Whether Demonstration mode is entered or not can be
determined by inspecting the backup data.
• The default setting is "Demonstration mode OK."
Standby
Initialization routine
Main loop processing
Microcomputer IC (PDC103A) (AF Assy : IC5501)
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
